Power Saving Mini Relay Contact RF Wireless Switches 3.7v4.2v5v6v7.4v9v12v 433 Smart Home Small Tiny Remote Switches ASK
Mini Size 24*11*8mm
much more lower power consumption
only 0.1-0.6 ma standby current
it is a Relay Contact Mini Remote Control Switch. Input DC3.7V-12V Output 0V Switching Value ,
use Relay Contact NO (Normally Open) COM ( Common)
or NC ( Normally Closed ) COM ( Common)
Working Voltage:DC3.7V-12V
Quiescent Working Current: 0.1-0.6ma
Working Current:20-30ma
Max Load: 1A Relay have better load less than 0.7A
Receiving Sensitivity: ≥-110dBm
Size:24*11*8mm
Learning Dot to add transmitter and adjusted Momentary Toggle Latched
Momentary----- Press and Hold---ON, Release----OFF
Toggle-------Press one time ----ON. Press it again ----OFF
Latched--------Press A ----ON, Press B-----OFF
- Black----------Input - GND
+ Red------------Input + VCC
NC ------------NC (Normally Closed)
COM-Yellow-------COM (Common)
NO Blue ----------NO (Normally Open)
It is a RF Transmitter Board without case and the Button, Just Input DC3V-DC12V Power for it, It will transmitting Signal, It is a Micro Transmitter Module for Learning Code Receiver. The Transmitter Module can be controlled by Smoke Detector or others Sensor or Microcontroller.
Working Voltage: DC3V-DC12V
(The Best Voltage is DC9V-DC12V, DC3V Distance will be Shorter)
Mini Battery DC3.7V-12V Big Battery / DC Stable Adapter DC3V-9V
Input DC3V-DC12V for the Receiver, It Transmitting Signal
Modulation Mode: ASK
Quiescent Current: 0uA
Working Current: 5-60 ma
Transmitting Power: 35-50mW
Encoding Type: Learning Code (Ev1527)
Transmitting Distance: 10-100m
Receiving Sensitivity: 108dBm
Size: 17*10*4mm