Description:
1.Dual power supply (two power supplies cannot be powered at the same time):
Power supply 1, DC 6.5-25V; Power supply 2, DC 5V
2.Working current: (Normal Mode) standby current 41mA, working current 83mA;
(Energy-Saving mode) Standby current 7mA, working current 45mA.
3.There are three input control ports: forward control(FWD), reverse control(REV), and stop control(STOP).
4.Two input trigger modes, Low-Pulse trigger mode, Low-Level trigger mode
5.Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes.
6.Cycle times: no cycle, 2-99 cycles, always cycle.
7.Three indicators: forward indicator(F LED), reverse indicator(R LED), stop indicator(S LED).
8.6 functional modes.
9. Relay load current, recommended less than 5A.
10. Size: 80*50*19mm
11. Weight: about 50 grams

This is a multi-function DC/AC motor forward and reverse controller with multiple control modes. Many control functions can be derived through reasonable settings.

Port:
DC 5.5MM female : Power supply 1, DC 5V power supply.
VIN : Power 2 positive, DC 6.5-25V power supply
GND : Power supply 2 negative
FWD : Forward input control (partial Function-Mode is invalid)
REV : Reverse input control (partial Function-Mode is invalid)
STOP : Stop input control (partial Function-Mode is invalid)
M+ : Motor positive
M- : Motor negative
P+ : Positive motor power supply
P- : Negative motor power supply

Package include:
1Pcs Multifunction AC/DC motor forward and reverse controller