Features:
1. 100% Brand New And Super High Quality.
2. High Strength: A B Glue Can Have High Strength And Can Sustain A Load Upto 2900 Psi, Once Welding Glue Is Applied And Cured Properly.
3. High Heat Glue: Specifically Design Heat Resistant Epoxy Sustain It Properties At Elevated Temperature Upto 150 Degree Celcius.
4. Magic Repair Glue Applications: This Cold Welding Liquid Can Used As Bonding Metal And Casting Appliance, Equally Applicable To Other Surfaces Such As Wood And Concrete. Common Application As Small Hole Repair In Metal Glue , Radiator Repair And Pipe Repair.
5. Instruction To Use: Mix The 2 Part Epoxy Equally, Apply To Clean Surface And Give It 24 Hours For Curing Before Appling Any Load. For Further Instruction Follow The Intruction Sheet Inside The Box.


Specification:
Material: Gule
Size: As Shown (1inch=2.54cm)
Net Content: 10Ml/ Each
Color: As Shown
Can Be Worked For Metal, Wood Glass, Ceramics Rigid, Plastics, Concrete.


How To Use:
1. Make Sure The Surfaces To Be Joined Are Clean, Dry And Free From Grease. Roughen Smooth, Glossy Surfaces. 2. Squeeze Out Equal Amounts Of Resin And Hardener. Mix Thoroughly And Use Within 5 Minutes (18-24°C Room Temperature).
3. Apply Mix To Both Joint Surfaces.
4. Assemble Parts And Hold Together With Clamps,Tape, String Or Weights,Etc. For 10 - 15 Minutes. The Newly Bonded Joint Attains Its Full Strength After About 30 Minutes.


Package Includes:
2Pcs Glue.


Note:
1. Due To The Different Monitor And Light Effect, The Actual Color Of The Item Might Be Slightly Different From The Color Which Is Showed On The Pictures.
2. Please Forgive 1 Cm/0.39"-3 Cm/1.18" Measuring Deviation Due To Manual Measurement.
   
 

Features:
1. 100% Brand New And Super High Quality.
2. High Strength: A B Glue Can Have High Strength And Can Sustain A Load Upto 2900 Psi, Once Welding Glue Is Applied And Cured Properly.
3. High Heat Glue: Specifically Design Heat Resistant Epoxy Sustain It Properties At Elevated Temperature Upto 150 Degree Celcius.
4. Magic Repair Glue Applications: This Cold Welding Liquid Can Used As Bonding Metal And Casting Appliance, Equally Applicable To Other Surfaces Such As Wood And Concrete. Common Application As Small Hole Repair In Metal Glue , Radiator Repair And Pipe Repair.
5. Instruction To Use: Mix The 2 Part Epoxy Equally, Apply To Clean Surface And Give It 24 Hours For Curing Before Appling Any Load. For Further Instruction Follow The Intruction Sheet Inside The Box.


Specification:
Material: Gule
Size: As Shown (1inch=2.54cm)
Net Content: 10Ml/ Each
Color: As Shown
Can Be Worked For Metal, Wood Glass, Ceramics Rigid, Plastics, Concrete.


How To Use:
1. Make Sure The Surfaces To Be Joined Are Clean, Dry And Free From Grease. Roughen Smooth, Glossy Surfaces. 2. Squeeze Out Equal Amounts Of Resin And Hardener. Mix Thoroughly And Use Within 5 Minutes (18-24°C Room Temperature).
3. Apply Mix To Both Joint Surfaces.
4. Assemble Parts And Hold Together With Clamps,Tape, String Or Weights,Etc. For 10 - 15 Minutes. The Newly Bonded Joint Attains Its Full Strength After About 30 Minutes.


Package Includes:
2Pcs Glue.


Note:
1. Due To The Different Monitor And Light Effect, The Actual Color Of The Item Might Be Slightly Different From The Color Which Is Showed On The Pictures.
2. Please Forgive 1 Cm/0.39"-3 Cm/1.18" Measuring Deviation Due To Manual Measurement.

DataCaciques