150W Bench Grinder With  6" x 1/2" Metal Polishing Kit

Suitable for polishing Aluminium, Alloys, Steel, Stainless Steel, Copper & Brass. Supplied with Spindle Adapters

Assembly – The buyer needs to Assemble the Polishing Kit to the Bench Grinder. For Assembly Instructions and Kit Contents Please See Below. 

1 x 6" 150W (1/5hp) Bench Grinder 

240v /  2950 rpm.

Supplied fitted with a UK 3 Pin Electric Plug. 

Comes fitted with

1 x 150mm 60 Grit Fine Grinding Wheel

1 x 150mm 36 Grit Medium Grinding Wheel

Assembly - The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached by the following method. 

Once the bench grinder side guards and the grinding wheels have been removed (please note that the left hand grinder shaft has a left hand nut), the mop spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit. Please remove the grub screws in the adapters first and then fit the adapters as far as they will go onto the shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten them using an allen key.

Polishing Add-On Kit Contents

2 x Bench Grinder Spindle Adapters.

1 x 4" x 1/2" Sisal Metal Polishing Wheel.

1 x 4" x 1/2" Close Stitch Metal Polishing Wheel. 

1 x 4" x 1/2" Loose Stitch Polishing Wheel.

Polishing Compound Bars 

1 x Grey Bar

1 x Orange Bar

1 x Green Bar

1 x Cloth

1 x Polishing Guide 

Free UK postage

Text 07577- 427166 for any questions or queries. 

Please check our other listings for a variety of machines, compounds, mops, scotchbrite wheels, grinding wheels and anything else connected to polishing.