eBay

27"(700mm) Acrylic Plastic PVC Bending Machine with Infrared ray calibration, 03.-10mm Thickness, 220V


for bending Acrylic, Plexi glass, PVC, PC, ABS, PP etc. Applicable thickness is 0.3-10mm.


Description:

The acrylic bending machine is a equipment which can softens and bends materials such as acrylic, organic plate, 


PVC, etc and other various thermoplastic materials into shapes by heating. It is widely applied.


Features:


• Humanized design, easy operation, and convenient use.

• Big worktable, boot without other assistance.


• Advanced infrared heating technology with circulating water cooling system, adjustable temperature.


• Adjustable heating surface of material, with scale to guarantee heating surface’s accuracy, conformity, ensure good bending effect.


• Evenly heated, instantly shaped, no deformation, no scorch, no foaming.


• Instant forming, temperature adjustable; Water circulating cooling system equipped;



Description:

The acrylic bending machine is a equipment which can softens and bends materials such as acrylic, organic plate, 


PVC, etc and other various thermoplastic materials into shapes by heating. It is widely applied.

1. Water input joint

2. Water output joint

3. Power plug

4. Protective tube

5. Heating switch

6. Temperature controller

7. Heating surface controller

Model ABM700
Theory Thermal forming
Specification 700mm
Applicable thickness 0.3-10mm
Voltage AC220V
Power 800W
Temperature range 0-600°C
Water pump power 20W
Product size 40" x 12" x 4.8" (1000 x 300 x 120mm)
Net weight 17KG
Package size 50" x 17.2" x 8.4" (1250 x 430 x 210mm)
Gross weight 23KG


Functions:

acrylic bending Machine is also called plastic plate bending machine, soften and bend the plastic plate by heating.



Installation:

1. Put the main machine on a stable table

2. Insert the plug.

3. Insert two water tubes, one end of tube with copper insert stick into the water pump. The other head of both tube stick into the copper joints on the main machine. 


4. 20L volume bucket or water tank, fill up with water, fix the water pump to the bottom of bucket/ tank. As below:



Operation:

1. Insert the plugs of water pump and main machine, turn on heating switch. The heating rod starts heating, cooling water starts to circulate.

2. Adjust the proper temperature according to the plate material and thickness, also adjust the heating surface controller gap to appropriate size.

3. Wait until the heating tube get red, put the material onto the worktable to heat, make sure the material just above the heating tube.

4. Bend the soft material promptly to any angle you want, cool for a while.

5. Finish, turn off the heating switch, then the pump.



FAQ:

Problem 1: No heating

Fault: Check whether the power works or not.

Solution: Make sure the power on.

Fault: Whether the temperature controller is in lowest or not.

Solution: Adjust the temperature controller to a high scale.

Fault: Whether the protective tube is intact or not.

Solution: Replace the protective tube.

 

Problem 2: Can not pump the water

Fault: Whether the pump has electric to work or not.

Solution: Replace the damaged pump.

Fault: Whether there is much air in the tube.

Solution: Fill up two tubes with water, dip the pump into water.


Applicable Materials:

Plastic plate: Acrylic, Plexi glass, PVC, PC, ABS, PP etc..

Application:

It is increasingly applied in school technological innovation course, decoration projects, packing of square columns or wall corners, fish tank, window edge, display counter, supermarket shelves, advertising light box, art products making, etc.




•