Highlight description:

[3 in 1 Wall Scanner] Wall Scanner Principle: Changes in the density of the material below the surface of the object to be detected causes the detector frequency to change, the maximum depth of detection under the surface of a uniform object: wood 30 × 30mm: ≤ 18mm, metal detection depth: iron pipe Φ25mm, ≤ 30mm, AC power: 90 ~ 250V ≤ 50mm.

[Accurate Detection] This is a density difference detector, as long as there is a density change area inside the object with the thickness of 3cm of the detected object, the detector will be able to determine the location of the area. If there is a wooden frame, metal or other objects with huge difference in density and wall inside the uniform wall, it can be detected, and the greater the difference in density, the deeper and wider the area of detection.

[Easy to Use] The detector sampling object ideally should be a relatively uniform density of the wall, but the actual use of the process, there is no relatively uniform density of the wall, so we require the place to be detected, repeated back and forth detection. The test button cannot be released during the entire sampling and probing process.

[Sound Alarm] Suitable for use in the interior decorative structure, can be detected within the wall of metal, wood, charged circuit location, when the induction of metal, wood, charged circuit, the instrument will have an analogue bar display and sound prompts.

[Sturdy and Durable] Made of high quality ABS, it is very rugged and durable, testing changes in material strength to accurately detect metal, wood and live circuits. The compact size also makes it easy to carry and use.

Detailed description:

Specification
Product name: Wall Stud Finder
Power supply: 6F22 type 9V battery (not included)
Product Size: 155 x 72 x 28mm
Material: ABS
Maximum detection depth:
Wood 30×30mm: ≤18mm
Metal detection depth: iron pipe Φ25mm,≤30mm
Alternating current: 90 ~ 250V≤50mm
Product Features.

Test Sampling.
Place the instrument on the surface of the object to be measured, lightly press the power switch next to the 2 seconds to switch on, press the middle of the selection key, select the category of the object to be measured, and then press the power button to take a sample, the sound of "drop" indicates that the sampling is successful.

Notes:
1.There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.
2.Please allow slight dimension difference due to manual measurement.

Parts List:

1 x Wall Stud Finder

We are always making efforts to providing better products and service. if you feel satisfied with us, please leave us a 5-Star on the Detailed Seller Ratings.