Feature: 1. GOOD PERFORMANCE: Micro DC gear motor, has low power, low noise, large torsion, and supports forward and reverse rotation, high efficiency and good durability.2. METAL STRUCTURE: The use of low carbon alloy steel material ensures the wear resistance and toughness of the geared motor and prolongs the service life. 3. ROTOR AND SHAFT: Adopt high accuracy one time forming rotor, pure copper winding, has high conductivity, and D shaped shaft is more convenient to install. 4. EASY TO INSTALL: The DC speed reduction motor is small in size and light in weight, fully enclosed structure is dustproof, easy to install and space saving. 5. WIDE APPLICATION: The micro motor is suitable for electric toy, water light needle, ti microcrystalline hydrometer, DIY electronic equipment, etc. Specification: Item Type: DC Gear Motor Package List: 1 x DC Gear MotorNote: 1. When you use the motor, there should be no binding things, such as the adhesive should not be injected into the bearing through the rotating bearing, which will hinder the of the motor. 2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to prolong the life, please check whether your load is in accordance with the regulations, not overloaded or hanging on the shaft end with objects that hinder the rotation. 3. It is made into an eccentric heavy radiation load, which is harmful to the life of the motor. 4. Do not store in high temperature or extreme humidity, and do not place in corrosive gas, which will reduce the motor effect. 5. Do not run the motor in the surrounding high temperature and humidity. 6. When soldering is required on the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron is 340±40°C, and the heating time is within 3s, and the plastic cannot be deformed. During the work, let the solder point into the motor or break the end of the wire, which will cause Motor function declines. 7. Do not let the motor shaft get stuck. When power is introduced, the motor will overheat in a short time and its accessories will be burned. 8. Due to the lack of skills of the staff, the quality of the motor cannot be guaranteed when the motor encounters the things mentioned in the manual, or when the apparent judgment is obviously faulty. 9. Supply the specified power and be sure that it is within the range of measurable requirements. 10. The installation of pulleys or gears should not be abnormally heavy when pressing in. 11. When installing the motor, the screw is too long, which will cause contact between the motor itself and the rotor, which will affect the characteristics. 12. Please note that the new type and old type of this product will b |
On Jul 10, 2024 at 01:24:29 PDT, seller added the following information:
On Jul 10, 2024 at 18:34:32 PDT, seller added the following information: