ANCEL FX8000: Support All System Diagnostic + Full OBD2 Functions + 6 Resets ( Oil Reset , ABS Bleeding , SAS Resets EPB Resets , BMS Resets , Throttle Adaptation + 12+ Language + Lifetime free update by WIFI
Why can ANCEL FX8000 be the first Choice ?
1.ANCEL FX8000 Support WIFI Lifetime free update,no extra charge
2.Support 12+ Languages ： English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean,Turkish.Polish,Chinese
3. Support OE-Level Automotive All System Diagnostic for lifetime free
4. Support Full OBDII Functions Diagnostics:
Reading Codes , Erasing Codes , Data Stream, I/M Readiness, Read Live Data Stream, View Freeze Frame Data, O2 Sensor Test, On-Board Monitor Test, Read Vehicle Information, Component Test
5. Support 6 Special Function: Oil Lamp Reset, Electronic Park Brake Reset(EPB) , BAT battery service, Steering Angel Sensor Reset (SAS) , ABS Bleeding, Throttle Adaptation
OE-Level Automotive All System Diagnostic for lifetime free
ANCEL FX8000 can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include : ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System ,Oil Service System , SRS System ,DPF System ，Air Conditioning System，Transmission System, etc...
Multi Language Support:
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean,Turkish.Polish,Chinese
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean,Turkish.Polish,Chinese
ANCEL FX8000 Support 6+ Kinds of Special Reset Service Functions
Oil Reset Service
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
2.After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
Electronic Parking Brake Reset (EPB Reset) :
1. If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
2. Reset must be performed in the following cases:
a) The brake pad and brake pad wear sensor are replaced.
b) The brake pad indicator lamp is on.
c) The brake pad sensor circuit is short, which is recovered.
d) The servo motor is replaced.
ABS Bleeding :
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
1. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Tire Pressure Monitor System Reset
Steering Angle Calibration (SAS Reset) :
To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
Battery Maintenance System Reset :
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done. Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage
more accurately, which can avoid an error message displaying on the instrument panel.
Electronic Throttle Position Reset (Throttle Adaptation) :
This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state.
Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
2.After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
Electronic Parking Brake Reset (EPB Reset) :
1. If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
2. Reset must be performed in the following cases:
a) The brake pad and brake pad wear sensor are replaced.
b) The brake pad indicator lamp is on.
c) The brake pad sensor circuit is short, which is recovered.
d) The servo motor is replaced.
ABS Bleeding :
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
1. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS. Tire Pressure Monitor System Reset
Steering Angle Calibration (SAS Reset) :
To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.
After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
Battery Maintenance System Reset :
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done. Battery matching must be performed in the following cases:
a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function.
b) Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage
more accurately, which can avoid an error message displaying on the instrument panel.
Electronic Throttle Position Reset (Throttle Adaptation) :
This function enables you to make initial settings to throttle actuators and returns the “learned” values stored on ECU to the default state.
Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
Full OBDII/EOBD/JOBD Car Diagnostics Functions:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
ANCEL FX8000 Car Supported List:
Full System Diagnose Scan: For Abarth, For Accura, For Alfa Remeo, For Audi, For BMW, For Bugatti, For Buick, For Cadillac, For Chevrolet, For Chrysler, For Citoren, For Dacia, For Daewoo, For Daihatsu, For Dodge, For Eurford, For Fiat, For Ford, For GM, For Gmsa, For Honda, For Hyundai, For Ifiniti, For Isuzu, For Jaguar, For Jeep, For Kia, For Lancia, For Landrover, For Lexus, For Lincoln, For Mahindra(Indian), For Maruti(Indian), For Maserati, For Mazda, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Nissangtr, For Opel, For Peugeot, For Porsche, For Renault, For Renault Samsung, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata(Indian), For Tlisuzu, For Toyota, For Vauxhall, For Volvo, For VW, For VAZ
Full System Diagnose Scan: For Abarth, For Accura, For Alfa Remeo, For Audi, For BMW, For Bugatti, For Buick, For Cadillac, For Chevrolet, For Chrysler, For Citoren, For Dacia, For Daewoo, For Daihatsu, For Dodge, For Eurford, For Fiat, For Ford, For GM, For Gmsa, For Honda, For Hyundai, For Ifiniti, For Isuzu, For Jaguar, For Jeep, For Kia, For Lancia, For Landrover, For Lexus, For Lincoln, For Mahindra(Indian), For Maruti(Indian), For Maserati, For Mazda, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Nissangtr, For Opel, For Peugeot, For Porsche, For Renault, For Renault Samsung, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Ssangyong, For Subaru, For Suzuki, For Tata(Indian), For Tlisuzu, For Toyota, For Vauxhall, For Volvo, For VW, For VAZ
Specification :
Screen: 7.0 inches LCD,800*480
Operating Voltage: 12 V (9 to 18V)
CPU/Processor: ARM9
ROM/SSD: 16GB
Wi-Fi: 802.11b/g/n 2.4GHz
USB Interface: USB 2.0
Diagnose Interface: DB15 interface
Operating Temperature: 0 ~ 50°C (32 to 122°F)
Free Update Period: Lifetime
Warranty Period: 1 Year
Package listing :
1 * FX8000 Handset
1* OBDII Diagnostic Cable
1 * 5V DC Charging Cable
1 * Quick Start Guide
1 * User Manual
Screen: 7.0 inches LCD,800*480
Operating Voltage: 12 V (9 to 18V)
CPU/Processor: ARM9
ROM/SSD: 16GB
Wi-Fi: 802.11b/g/n 2.4GHz
USB Interface: USB 2.0
Diagnose Interface: DB15 interface
Operating Temperature: 0 ~ 50°C (32 to 122°F)
Free Update Period: Lifetime
Warranty Period: 1 Year
Package listing :
1 * FX8000 Handset
1* OBDII Diagnostic Cable
1 * 5V DC Charging Cable
1 * Quick Start Guide
1 * User Manual
