Olympus  Motordrive  2 .

A motordrive unit with built-in computer that functions in combination with a separate power unit. Can be switched between single frame or sequince photography at a maximum speeds of 5-frames-per-second. Incorporates  the worlds first “shockles motor” to eliminate shock during motor start-up and stopping. Twin motors revolving in opposite directions virtually cancel out all vibrations. Provides for motor driven film rewind when used with the OM-4 and OM-3. Gives a graphic display indication of number of frames and operational status. Switching of the motor drive mode is done by the control on the power unit.

Specifications:

Compatible camera’s:

OM-4, OM-3, OM-4T ,OM-3T, OM-2sp , OM-2n , OM-2 , OM-1n, OM-1 , OM-40, OM-30 and OM-20.

Film advance : 5 frames per second maximum continuous filming without mirror lock-up as well as single frame advance.

Shutter speed : All availleble shutterspeeds (1/2—1/1000sec only in sequince mode with OM-1).

Power supply : M.18volt control grip 1,2 (12 AA batteries) M.15volt NI-Cad control pack 1,2 ( rechargeable ) M.AC control box.

Input voltage : DC 18 volt ( AA batteries )  15 volt (NI-Cad) 12—16 volt (large potentiality DC power supplies)

Auto film positioning : The film automatically advances to the shooting position as soon as the camera back is closed (with OM-4, 3 OM-2sp , 40, 30 and 20.)

Auto rewinding : The motor automatically stops when rewinding is completed (with OM-4 and OM-3)

Frame display: Digital LCD display subtractive counting : two SR44 or LR 44 batteries provide power for the LCD display.

Weight : 360 grams.

Olympus M.15V Ni-Cd Control Pack 2.

This is a flat type rechargeable power source with a special built-in Ni-Cd battery. It can be attached to the Motor drive 1 or 2 directly or via a relay cord. It provides a Mode Selector Dial ( with Single, Sequence and OFF positions)  for control of the Motor drive. The extra shutter release button on the rear is especially convenient during vertical format photography. On a full charge the control pack can shoot about 20 rolls of 36 exposure film . ( when used with the OM-3 ,4 and motor drive 2)

Specifications :

Type : Flat type , rechargeable power unit for motor drive 2 and motor drive 1.

Battery : Built-in dedicated Ni-Cd battery.

Recharging : Dedicated  M.15 volt Ni-cd charger unit.

Recharging time: 4—5 hours.

Voltage : 14,4 volt.

Number of rolls exposed: about 20—36 exposures rolls with motor drive 2 . About 40 –36- exposures rolls with motor drive 1.

Motor drive attachment : Direct attachment by tightening screw. Provided with a direct contact : Relay cord usable.

Selection of film advances modes : Single , Sequence and Off by dial switchover endless, pull-up type dial.

Release Button : Pushbutton with lock.

Battery check : Pushbutton battery checker  and 3—level  LED  display.

Weight : 260 grams.

Olympus M.15v  Ni-Cd Charger 1.  ( 110 volt.)

This charger is needed  to Charge the Olympus M15v Ni-Cd Control Pack ½ . Charging time for full capacity is 4-5 hours.

Spec:

Type : Charger exclusively for use with M.15v Ni-Cd control Pack ½

Supply circuit : AC 100/115/220 or 240 volt 50/60 Hz. Voltage selection via clamping screw.

Electrical connection: AC mains, Plug-in type body,  Snap-On type special mount plug with 1 m cord.

Charging time : 4-5 hours for full charge.

Dimensions and weight : 66x49x42mm.  260 gram.

Condition:

Motor drive 2 with normal users wear, the drive operates on all modes set and reset buttons work fine, the light of the display works . Display is fine.

Nicad control pack 2 , the batteries are replaced with a new battery pack and works fine keeps it charge OK. Smal part is missing see pictures.

M15v Nicad charger 1. 110volt  this charger is fine. If desired we provide a 200 to 100volt converter.