GEPRC CineLog35 V2 Analog/HD Wasp/HD O3 FPV Drone 3 Version PNP/ELRS 2.4G/TBS Nano RX RC FPV Quadcopter Freestyle Drone
Please note that Drones does not come with a remote control.
Features:
1.New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
2.Adopts the GEP F722-45A AIO V2 high performance flight controller.
3.Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
4.For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
5.SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
6.Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
7.Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
8.Carefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flight feeling.
Description:
The Camera Adopts TheBottom-Mounted Shock Absorption GimbalTo Solve The Camera lMU's Resonance lssue,Excellent anti-shake effect, clear and stunning visual experience.Optimize The Structure ofThePropeller Guard And The Fuselage,Enhance the overall structure of the frame to increase the impact strength by 30%.The 03 Air Unit Memory card And USB PortAre lmproved To Facilitate Data Reading. Fuselage Fusion Battery ConnectorUsing XT60E1-M Plug, Stable And Reliable, One-hand operation to solve the tedious power-on.Launch With GPs VersionRealize mergency Rescue Mode When the remote control is out of controlthe drone will automatically switch to rescue mode.When the video signal is lost, you can also manually switch to rescue mode.
Specifications:
Model: Cinelog35 V2 Analog
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal Plate: 2.0mm
Top Plate: 3.5mm
Bottom Plate: 1.5mm
FC system: GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: GEPRC RAD 1W(UFL)
Camera: Caddx Ratel2
Antenna: GEPRC Peano 5.8 RHCP UFL
Motor: SPEEDX2 2105.5-2650KV (6S)
Propeller: HQProp D-T90MM
GPS: GEP-M10
CineLog35 V2 Analog TBSNanoRX weight: 263.8g
Receiver: PNP, GEPRC ELRS2.4G, TBS Nano RX
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ -8′ 30″
Model: Cinelog35 V2 HD Wasp
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system: GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: Link
Camera: Runcam Wasp
Antenna: GEPRC Peano 5.8G LHCP UFL
Motor: SPEEDX2 2105.5-2650KV (6S)
Propeller: HQProp D-T90MM
GPS: GEP-M10
Cinelog35 V2 HD Wasp TBSNanoRX weight: 277.2g
Receiver: PNP, GEPRC ELRS 2.4 G, TBS Nano RX
Recommended battery:LiPo 1050mah-1300mah
Flight time:5′00″ -8′ 30″
Model: Cinelog35 V2 HD O3
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system: GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: O3 Air Unit
Camera: O3
Antenna: 5.8G&2.4G
Motor: SPEEDX2 2105.5-2650KV (6S)
Propeller: HQProp D-T90MM
GPS: GEP-M10
CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ -8′ 30″
Package Included:
1 x CineLog35 V2 Analog/HD Wasp/HD O3
2 x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
2 x Battery Silicone Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x L-shaped screwdriver (2mm)
1 x L-shaped screwdriver (3mm)
1 x M5 wrench
1 x plastic tweezers
1 x Antenna fixed tube (pair)
1 x Keychain
1 x GP Camera Mounting Base
1 x Naked GP Camera Mounting Base
1 x Antenna Mounting Base
2x cup head screws M2*18
2x round head screws with pad M2*5.5
1x round head screws M2*12
2x Rivet nut M2
4x round head screws M2*8
4x round head screws M2*7
4x round head screws M2*6
2x round head screws M2.5*6
2x hexagonal screw M1.6*8
1x Flange nuts M5
2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
2x Iron nut M2
2x Iron nut M2
2x Camera gimbal shock absorbing rubber
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
