433Mhz Universal Wireless Remote Control Switch AC 85-250V 2CH Relay Receiver Module & RF 433 Mhz for Light Switch
Specifications:
Input Voltage: AC 85 ~ 250V
Quiescent Current: <8.5MA
RF working mode: superheterodyne
Receiving Sensitivity: >97dbm
Remote control distance: Approx. 50 meter
Decoding mode: MCU software decoding
Remote storage: 16pcs
Support remote type: learning code (1527)
Model switching: Momentary&Toggle&Latching
Wiring type: Fixed terminal
Operating Frequency: 433MHz
Remote control battery: 1* CR2032 batteries(Included)
Remote control size: 61x29x10mm
Features:
1. Mainly used in lighting, garage doors, rolling shutter doors, remote control curtains, DC motors, motor lifting, electric doors, windows, lifting equipment, gateways, elevators, industrial control and security industries, etc.
The complete wireless intelligent remote control system has a wide range of uses, especially suitable for wired door and window control systems and anti-theft alarms to realize the system transfer from wired to wireless.
2. More intelligent design can make our lives more convenient.
3. In order to prolong the service life of the receiving board, the company does not recommend controlling high-power loads. When controlling 220V, it is recommended to control a maximum of 500W per channel.
Instruction Manual:
1. Clear code: Push the learning button on the receivers for 8 times , the codes will be wiped.After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.
2. Learning the Code:(Momentary)
Push the learning key on the receiver once, initiate momentary setting mode.Just wait for the LED switches off.Push the remote button, LED indicator on the receiver board will flash briefly and switches off.
After 3 seconds, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
Learning the Code: (Toggle)
Push the learning key on the receiver twice, initiates toggle setting mode.After few seconds, the LED switches off.Push the remote button, LED indicator on the receiver board will flash briefly and switches off.
After 3 seconds, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
Learning The Code (Latching):
Latching mode require two different buttons, the first one for "ON", the second one for "OFF".For example: button A = ON , button B = OFF.
Push the learning key on the receiver 3 times, initiate latching mode setting.
After few seconds, the LED indicator on the receiver will flash briefly and switches off.
Push the remote button A, LED flashes 5 times.
Push the remote button B, LED flashes 5 times.
3 seconds later, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
A = ON , B = OFF.
Package Includes:
1X Receiver
1X Remote control(Included 1* CR2032 battery)
Notes:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting).
3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.
Specifications:
Input Voltage: AC 85 ~ 250V
Quiescent Current: <8.5MA
RF working mode: superheterodyne
Receiving Sensitivity: >97dbm
Remote control distance: Approx. 50 meter
Decoding mode: MCU software decoding
Remote storage: 16pcs
Support remote type: learning code (1527)
Model switching: Momentary&Toggle&Latching
Wiring type: Fixed terminal
Operating Frequency: 433MHz
Remote control battery: 1* CR2032 batteries(Included)
Remote control size: 61x29x10mm
Features:
1. Mainly used in lighting, garage doors, rolling shutter doors, remote control curtains, DC motors, motor lifting, electric doors, windows, lifting equipment, gateways, elevators, industrial control and security industries, etc.
The complete wireless intelligent remote control system has a wide range of uses, especially suitable for wired door and window control systems and anti-theft alarms to realize the system transfer from wired to wireless.
2. More intelligent design can make our lives more convenient.
3. In order to prolong the service life of the receiving board, the company does not recommend controlling high-power loads. When controlling 220V, it is recommended to control a maximum of 500W per channel.
Instruction Manual:
1. Clear code: Push the learning button on the receivers for 8 times , the codes will be wiped.After clearing the code, all the remote controls need to be re-paired in order to control the receiver again.
2. Learning the Code:(Momentary)
Push the learning key on the receiver once, initiate momentary setting mode.Just wait for the LED switches off.Push the remote button, LED indicator on the receiver board will flash briefly and switches off.
After 3 seconds, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
Learning the Code: (Toggle)
Push the learning key on the receiver twice, initiates toggle setting mode.After few seconds, the LED switches off.Push the remote button, LED indicator on the receiver board will flash briefly and switches off.
After 3 seconds, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
Learning The Code (Latching):
Latching mode require two different buttons, the first one for "ON", the second one for "OFF".For example: button A = ON , button B = OFF.
Push the learning key on the receiver 3 times, initiate latching mode setting.
After few seconds, the LED indicator on the receiver will flash briefly and switches off.
Push the remote button A, LED flashes 5 times.
Push the remote button B, LED flashes 5 times.
3 seconds later, the LED indicator will switch on again, indicates remote and receiver are successfully paired.
A = ON , B = OFF.
Package Includes:
1X Receiver
1X Remote control(Included 1* CR2032 battery)
Notes:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting).
3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.
