We are a reliable source for many of your litz wire and crystal radio part needs. Since 2008, we've sold more than 19,000 orders with excellent customer feedback. Please visit our eBay Store at mkmak222_Litz Wire to see what is currently available.

We have over a hundred types of litz wire in stock. They contain 5 to 1650 strands of AWG 48 to 28 (0.03 mm to 0.31 mm) wire. The litz wire's equivalent AWG are from 24 to 6.

Most orders will be shipped within one day. Small amounts of wire will be coiled on 6” or 7” diameter paper spool to prevent the destruction of the litz wire structure. Larger amounts will be coiled on the original plastic spool.

Note: For avoid damage the structure of the small Litz wire, please observe photo “How to un-coil litz wire from the spool" on my eBay List.

When winding a coil, in order to smoothly un-coil the Litz wire from the paper spool, the simple method is: Vertically fix a 1/4-inch diameter screw rod on a flat plate, and then put paper spool into screw rod flat. When you pull out the litz wire from the paper spool, the paper spool can rotate freely on the screw rod, and the litz wire will not be twisted and knotted.

You only need an electrical solder iron to solder the litz wire. When you heat the end of litz wire, the polyester yarn insulation will be melted and recoiled, the polyurethane insulation that covers on copper strands wire will be completely volatilized, and the copper wire will be tinning.

If you don’t see a particular type of litz wire that you're interested in, please contact us so that we can help arrange a custom order. We can usually have these delivered in three weeks. Large orders may be purchased at the wholesale price.

Here you are bidding on a 200 feet spool of brand new 20/46 Litz wire. This type 1 litz wire contains 20 strands of individually insulated AWG #46 (~ 0.04 mm) enameled wires, equivalent to AWG #33 single wire. It’s outer diameter is 0.31 mm.

This Litz wire was manufactured in China and is RoHs compliant. It uses double layer Polyester for the outside insulation and Polyurethane insulating film for each copper strand. It is very easy to solder with a simple 30 watt soldering iron. 

If you need longer wire, please order more Quantity at the same time so we can give you the whole length in one piece without discontinuity. Please contact us for your specific request.

The recommended operating frequency for Litz wire with AWG 46 strands is 850 KHz to 1.4 MHz, best for make High Q Coil for Amateur radio and Crystal Radio.

International buyers please check the Shipping and payment section.

We also have hundreds other size of Litz wire for sale. Please search in my eBay Store mkmak222_Litz Wire . When you search for litz wire, use the key word format “xxx/yy”. For example, if you are looking for 660 strands of AWG 38 litz wire, enter key word “660/38” to search (660 is the number of strands, 38 means the strands are used AWG 38 enameled wire)

Here are the litz wire currently in stock and their recommended operating frequency:

Strands AWG Size -- Recommended Operating Frequency

Number of Strands / Strands AWG size

AWG 48 (0.03 mm) -- 1.4 MHZ to 2.8 MHZ:

180/48, 300/48, 420/48, 675/48, 1100/48, 1725/48

AWG 46 (0.04 mm) -- 850 KHZ to 1.4 MHZ:

10/46, 20/46, 30/46, 40/46, 60/46, 66/46, 100/46, 175/46, 270/46, 330/46, 420/46, 660/46, 924/46, 1050/46, 1162/46

AWG 44 (0.05 mm) -- 350 KHZ to 850 KHZ:

10/44, 20/44, 30/44, 40/44, 60/44, 100/44, 125/44, 160/44, 255/44, 405/44,  650/44, 1050/44

AWG 42 (0.06 mm) -- 200 KHZ to 350 KHZ:

16/42, 26/42, 40/42, 66/42, 105/42, 165/42, 270/42, 420/42, 660/42, 1050/42

AWG 40 (0.08 mm) -- 100 KHZ to 200 KHZ:

17/40, 27/40, 42/40, 66/40, 105/40, 108/40, 170/40, 270/40, 435/40, 700/40, 1100/40

AWG 38 (0.10 mm) -- 50 KHZ to 100 KHZ:

16/38, 25/38, 40/38, 66/38, 100/38, 162/38, 200/38, 260/38, 280/38, 420/38, 660/38, 1050/38, 1650/38

AWG 36 (0.13 mm) -- 20 KHZ to 50 KHZ:

16/36, 27/36, 41/36, 65/36, 105/36, 165/36, 265/36, 420/36

AWG 33 (0.18 mm) -- 10 KHZ to 20 KHZ:

13/33, 21/33, 32/33, 53/33, 82/33, 100/33, 150/33, 210/33, 329/33

AWG 30 (0.25 mm) -- 1 KHZ to 10 KHZ:

7/30, 11/30, 17/30, 26/30, 42/30, 65/30, 110/30

AWG 28 (0.31 mm) -- 60 HZ to 1 KHZ:

5/28, 7/28, 10/28, 18/28, 27/28, 42/28, 66/28