3½" Gauge Display Track Kit with Screw Fit Chairs - 1.25m (4ft)
Part No: PNR-10E
PNP Railways Display Track Kits - the perfect solution for exhibiting your finished model or standing your loco on while building. Our cost-effective track kits provide an authentic display track system that mimics the appearance of full-size railway components.
No need to work out what components you need; we have done it for you. The kit contains the correct amount of parts to build either a 4ft (1.25m) or 8ft (2.5m) length of track. All you need to do is decide on the number of kits required and which rail fitting you prefer.
Our track kits come complete with sleepers that have a wood grain effect to ensure an authentic look. The sleepers are also pre-drilled with pilot holes, making them ready to use straight out of the box.
To enhance the overall look of your display, our track kits can be mounted on a plinth with ballast. We recommend using 8mm Limestone chippings, which are readily available from your local DIY store or builders merchant.
Invest in a PNP Railways Display Track Kit today and showcase your models in style.
This listing is for a 1.25m Length of 3½" Gauge Display Track with Screw Fit Chairs - other options available please refer to the menu.
3½” Gauge Sleepers - The sleepers are slightly over scale, but still in keeping for standard scale engines, the sleepers are also ideal for narrow gauge. Can be used for ground level tracks (if your balance is ok) or ideal for raised level tracks.
"Screw Fit Chair" – a PNP Railways original design manufactured from a strong engineering plastic. This chair will provide secure attachment for your rail to the sleeper with just two screws
Sleeper Dimensions:
(L) 190mm x (W) 22mm x (H)15mm
Recommended Sleeper Spacing: 70mm centres
Kit contents:
PNR-2C | 16mm (5/8" x 5/8") Aluminium Flat Bottom Rail | 2 x 1.25m Lengths |
PNR-9K | 3½” Gauge Sleepers | 18 |
PNR-1T-B | Screw Fit Chair | 36 |
PNR-!T-E | Screws | 72 |
£5.95
No listed products found.