CT20PE03 PEUGEOT 207 2004 ONWARDS ISO WIRING HEAD UNIT HARNESS ADAPTOR LEAD

This lead is designed to fit an aftermarket stereo (Pioneer, Sony, Kenwood etc) into the following vehicles;

Peugeot:

Boxer: 2005 To 2007

E7: 2007 Onwards

Expert: 2007 Onwards

406 Coupe 2004 Onwards

3008 2004 Onwards

807 2004 Onwards

407 2004 Onwards

207 2004 Onwards

A harness adaptor lead allows you to install a car radio of your choice without cutting any of the existing car wiring.

With vehicles that have the new Fakra or Quadlock connection that features a small lever to make the connection, there is no ignition switched 12v supply. This is usually required for aftermarket head units, and they won't power up with out this being connected. 

To resolve the issue, you will need to be technically competent to a small level. You will need to connect the red wire to an ignition switched 12v supply from the fuse box of the vehicle. One such supply would be that which feeds the cigar lighter for example. You may require an electrical test meter to determine the relevant contact.

Once the red wire has been connected securely and professionally to a +12v ignition switched supply, the rest of the installation is straight forward.

The orange wire also remote on these harness adaptors is only for illumination, and can be connected to a +12v supply on lighting circuit such that radio illumination works when vehicle lighting is switched on, or dims if radio is switched on.

As you will see this lead comes supplied with the Fakra Aerial connection. just a simple plug and play system.

Please note, this lead is for the NON-AMPLIFIED systems on these vehicles only. If you are having trouble identifying this, please contact your local dealer.

This lead does not work if your have controls on the steering wheel or on the steering column. They do require a special lead and can be supplied so please contact us for more details.

40-Pin Fakra Connector with Aerial Adapter & ISO Connector