Wireless Reversing Parking Camera 7LED Sensor +  7" TFT LCD Car Monitor Kit

7 IR LED Night vision Waterproof camera
Wide View Angel 120º
7" Car Monitor TFT LCD
Wireless Transmitter Receiver Kit
Simple to installation , Easy to use Easy to mount

Description
waterproof IR camera with wide view angle
7" High quality TFT LCD monitor
2 channel video inputs
2.4G wireless video transmission
Easy installation
Features:
7" TFT LCD monitor
Available for VCD/DVD/Camera
2 channels video input, full color display. auto white balance
Automatic back sight function for car backing
100% waterproof camera with 120° wide view angle
7 infrared LED lamps, IR night vision up to 10 meters
Can easily adjust the camera installation angle in multi-level
Headrest style installation, support screen rotation, easy to mount & easy to use
Specifications:

Reverse Camera

*Car Rearview /Reverse /Backup camera
*High Definition and Wide Viewing Angles
*Waterproof and Night vision
* Pickup device : 1/3" CMOS sensor
* System: PAL/NTSC
* Validity pixel: PAL: 628*586 NTSC: 656*492
* Sensor area: 4.08mm*3.12mm
* Horizontal definition: 420 TV Line
*Shutter speed: 1/60-1/20000
* Minimum illumination: 01-0.5LUX/F=1.2 (0 Lux with IR on)
* Voltage: DC-12V ;
*Video Output : RCA Connector,1.0vP>P,75Q
*Consumption : Max 300mA with IR on
*Operating Temp:-20°C~75°C RH 95% max
*Lens Angle:135 degree
*Weight:60g (Camera only)

7" CAR TFT LCD MONITOR

Display Size:7.0 Inch
Colour:Black
System :PAL & NTSC
High-Resolution:800*480
Screen format:16:9/4:3
Operation mode:Touch screen Button and remote control
Item Size:About 174 x 113 x 25mm.
Video Input:2-channel, change channel by V1/V2 switch
Video input: AV1 connected DVD/VCD/GPS/TVB,rear view camera connected to AV2(when the camera connect with reverse line,the screen switch when reversing AV2,automatically back to AV1 when you exit reverse or automatically power off.)
Rear watching: image can be changed left and right
Power requirement:DC 12-24V
Power:6-7W
Contrast:350:1
View Angle:160 wide degree
Operating distance:10 meters
Storage Temperature:-30C-80C
Operation Temperature:-20-75C
Video:2 Way video input(V1/V2 selecting)
Net Weight: Approx. 740g

Wireless Transmitter & Receiver Module

Transmitter is build with one video input yellow plug and a DC outplut red plug,
receiver only build with a yellow plug video output,
please do not mislead which one is receiver,which one is transmitter,
the receiver will turn on with red light when it get power,
the transmitter will turn on with blue light when it get power,
receiver is need to connect with the monitor side,
transmitter is need to connect with the camera side,

for the monitor,please install it with car 12v+/- by dc cable
for the reciever,please connect it with the monitor video input by the yellow plug,and connect the reciever with the car reversing control wire 12v+/ground
(The reversing control wire 12v+ is come from the reversing gearbox switch,please find it out with your vehicle before installed this goods)
for the camera,please conenct it with the transmitter (red plug to red plug,yellow plug to yellow plug)
for the transmitter,please connect it with your reversing light 12v+/ground
all is ok now,
when your vehicle's reversing gear is selected,the receiver and the transmitter will get power
then the camera will work,and you can see the video by the monitor,
when you complete reversing,the camera and the receiver transmitter will automatically turn off,

Packages:

1 x7"TFT LCD Monitor (DC 12V)
1 x 7IR LED Rearview camera (DC 12V)
1 x Mounting Plate
1 x Trestle with Adhesive
1 x Remote Controller (batteries May be remove for air parcel)
1 x Instruction 
1 x signal Transmitter
1 x signal Receiver

Note: Please do not use the car 24v power for the kit, Or the camera and the monitor will broken
FAQ:?
Q:the item is wireless camera,Why there is so much cable/ wired need to conenct for it?
A:The wireless car rear view camera is meaning that there is no need to connect any video cable from camera to monitor,
All of the cable is for camera and monitor or the reciever tranmitter,
You didn't need to link the video cable around your car if you use the wireless reversing camera kit
Q:Does it work with my car/ horse trailer/carvan/motorhome?
A:Please check the volt of your vehicle electronics system,
If it is 12v,This item will work fine,
If it is 24v,This item will not work and the camera will be damage!
Q:Can I install the camera kit for long time view to track the Traffic behind my vehicle when driving?
A:Sorry that if you installed it for long time rear view,This camera should be die out soon,
if you want the long time rear view,Please buy the "18 led reversing camera" in my shop,the 18 led camera is best for long time rear view!
Q:Does the image of the camera is mirror image?
A:the image ofall the reversing camera is mirror image!
Q:Does the monitor showing with grid-line on it??
A:the camera build with grid-line function on it,If you connect the camera to any monitor,you can see the grid line on the display
Q: What is the monitor's blue cable connect for?
A:It is connect for your reversing system switch positive,Please do not connect it with the car 12v+ directly or connect it with the red wire of the monitor,Or you can't turn the monitor off and can't switch the V1/V2 button to select the video input from one to the other
Q:The monitor shown the blue screen and said "no singal"?
A:Please click the V1/V2 to select the correct video input for the monitor
Q:Still "no signal",I can switch the monitor power on/off or switch the V1/V2 but
A:please do not mixup which one is the receiver which one is the transmitter
The receiver is connect with the monitor,the led light on it is red color
the transmitter is connect with the camer,the led light on it is blue color
Somebody mixup with them and not work,
Q:The monitor build with 2ch video input,can I connect two wireless camera for this monitor?
A:Sorry that it will no work,All of the reciever and transmitter is in same frequency,If you used two wireless camera for the same vehicle,They will interference the video signal each other and the receiver can't get the correct signal from transmitter,So it will not work
If you want to add the second camera for this wireless camera kit,Please choose the wired camera and link by video cable form the monitor to camera