This HIGH QUALITY & HIGH PERFORMANCE speaker kit fits ALL E46 3 Series BMW cars (including coupes, sedans, convertibles and all M3)

This impressive system sounds amazing and is very powerful like systems costing hundreds more.

The kit also includes two or four high fidelity 3-way crossovers, audio harness connection kit, all screws, adapter rings, detailed instructions with photos and more.  If you only need some items or specific speakers in the kit, please message for a custom quote.

  • Kit is intended for those who want to replace the ENTIRE sound system including the amplifier and subwoofer (optional, see below). You can keep the OEM head unit.
  • It replaces ALL OEM Harman Kardon "premium" speakers and ALL OEM non-Harman Kardon speakers.
  • No need to cut or modify your existing speaker connectors, wires or audio harness.  This will allow you to return your car to stock if you ever need to. It is completely reversible (but why would you want to?)
  • It is very difficult to find speakers that fit BMW's since they are thinner than most speakers on the market.  This kit is the result of hours of research and fitting and is proven to fit into BMW E46 3-series models.
  • It is highly recommended that you upgrade your amplifier to a 5 or 3 channel amplifier (one channel for a subwoofer) or a mono subwoofer amplifier, then you can also upgrade or install a high powered subwoofer (see subwoofer section below and contact us for details if you are interested).
  • If you just want to replace the speakers but not the amplifier, this kit is not recommended, but it will still work (see notes further below).

Why are these speakers better? (Please also see the Specifications Comparison Table below)

1) Materials are better:  Aluminum vs. paper cones, rubber surrounds vs. foam

2) Neodymium magnets vs. light common magnets

3) The front woofers have a solid aluminum cast frame whereas the OEM woofers have a cheap stamped steel frame.

4) Larger speakers for fuller sound

5) Higher power handling (on average 4x that of OEM) for a much fulfilling and satisfying listening experience

6) Don't waste your money on BSW (Bavarian Soundwerks) kits:  They charge over $800 and they use low quality paper cones and foam surrounds.  BSW speakers only handle the same power as the OEM speakers, which is very weak.  This upgrade handles 4x more power! and allows you to do a FULL audio upgrade, not just speakers.  Please read on...

Speaker specifications and comparison to OEM

LARGE FRONT & REAR WOOFERS
(Only large front woofers for convertibles, smaller woofers included for rear in convertibles)

Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, these speakers can outperform drivers that cost several times the price.  Low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, rubber magnet boot, and gold terminals.
    • Excellent car-audio midrange/midbass
    • High-end low-distortion motor with two shorting paths to reduce inductance

PRODUCT SPECIFICATIONS
Power Handling (RMS)     
40 Watts 
Power Handling (max)     
80 Watts 
Impedance     
4 ohms 
Frequency Response     
50 to 3,000 Hz 
Sensitivity     
89 dB 1W/1m 
Voice Coil Diameter     
1" 


THIELE-SMALL PARAMETERS
Resonant Frequency (Fs)     51.8 Hz 
DC Resistance (Re)     2.9 ohms 
Voice Coil Inductance (Le)     0.47 mH 
Mechanical Q (Qms)     2.67 
Electromagnetic Q (Qes)     0.47 
Total Q (Qts)     0.40 
Compliance Equivalent Volume (Vas)     0.43 ft.³ 
Mechanical Compliance of Suspension (Cms)     1.21 mm/N 
BL Product (BL)     4.05 Tm 
Diaphragm Mass Inc. Airload (Mms)     7.82g 
Maximum Linear Excursion (Xmax)     4.4 mm 
Surface Area of Cone (Sd)     84.9 cm² 

MATERIALS OF CONSTRUCTION
Cone Material     Aluminum 
Surround Material     Rubber 
Voice Coil Wire Material     Copper 
Voice Coil Former     Aluminum 
Basket / Frame Material     Cast Aluminum 
Magnet Material     Ferrite 


                 FRONT & REAR TWEETERS
  • Compact neodymium motors have low stray field
  • Ferrofluid enhances power handling and helps damp resonance
  • Great top-end air and sparkle
Specifications: Power handling: 15 watts RMS/30 watts max • VCdia: 0.75" • Le: 0.03 mH • Impedance: 4 ohms
• Re: 3.2 ohms • Frequency range: 3,500-25,000 Hz • Fs: 2,072 Hz • SPL: 90 dB 1W/1m



FRONT & REAR MIDRANGES

Aluminum cone driver demonstrates the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction.
  • Rubber-edged aluminum alloy cone
  • Large excursion capability
  • Self-shielded Neo-Balanced motor structure
  • 4-layer underhung voice coil with polyimide former
  • High power handling
PRODUCT SPECIFICATIONS
Power Handling (RMS)     15 Watts 
Power Handling (max)     30 Watts 
Impedance     4 ohms 
Frequency Response     85 to 20,000 Hz 
Sensitivity     79.4 dB 1W/1m 
Voice Coil Diameter     0.75" 

THIELE-SMALL PARAMETERS
Resonant Frequency (Fs)     84.1 Hz 
DC Resistance (Re)     3.4 ohms 
Voice Coil Inductance (Le)     0.41 mH 
Mechanical Q (Qms)     5.76 
Electromagnetic Q (Qes)     0.80 
Total Q (Qts)     0.70 
Compliance Equivalent Volume (Vas)     0.03 ft.³ 
Mechanical Compliance of Suspension (Cms)     1.65 mm/N 
BL Product (BL)     2.2 Tm 
Diaphragm Mass Inc. Airload (Mms)     2.2g 
Maximum Linear Excursion (Xmax)     3.5 mm 
Surface Area of Cone (Sd)     15.6 cm² 

MATERIALS OF CONSTRUCTION
Cone Material     Aluminum 
Surround Material     Rubber 
Voice Coil Wire Material     Copper 
Voice Coil Former     Kapton® / Polyimide 
Basket / Frame Material     Steel 
Magnet Material     Neodymium 

    What's included in the kit?
    You get ten or twelve speakers of superior quality, capability and materials PLUS all the other items shown in the kit.

    *Coupes and sedans get two large woofers for rear (same as front woofers)
    *Coupes and sedans can choose between two tweeters for rear or two midranges for rear depending listening preference.

    Tweeters and Mid-Range Speakers
    Perfect fit for front door and rear Tweeters and front Midrange Speakers
                                            
    Compare to OEM
    Why would you replace with or stay with OEM?!

    After only a few years, the foam and paper cones in the OEM midranges and woofers in your car will fall apart and rot away (just like your car's suspension bushings!), and you will not know because you can't see it! (and you'll be listening to broken speakers without knowing it).  BMW may make the ultimate driving machine, but definitely not the the ultimate listening machine!  See listing photos.

    Woofers
    Front Door and Rear Seating Area (compare to OEM). Why would you replace with or stay with OEM?!               
    Cross Overs 500W capacity each

    High power and quality three way crossovers capable of handling up to 500W each.  You'll never need that much, or will you?

    Harness Connect Kit
    This will allow you to access all the speaker connectors in the car through its existing audio harness without having to run new wires or cut any existing wires.

    NOTE 1:  Unlike some unscrupulous sellers on eBay, we're not just selling the speakers without telling you what you really need.  You will also need to upgrade your amplifier for optimal results (We recommend the Alpine MRX-V70 or PDR-V75.  Get them on Amazon for around USD $275).
    • What will happen if you don't replace your amplifier?  Your new speakers' max volume will only be 1/2 as loud since they have a higher resistance (impedance 4 ohm vs 3 ohm OEM) than the cheap OEM standard or OEM Harman Kardon speakers from BMW.  They will sound good, just not nearly loud enough.  You don't have to upgrade the amplifier, but it's highly recommended.
      • There are two main reasons for this:
        • 1) These new speakers can handle much more power (an average of 3x to 4x times more power!) than the OEM speakers (see specifications compare table below).
        • 2) These speakers have a higher impedance rating (ohms) which means that they need more power.  Why did BMW make their speakers with lower impedance
          • Answer:  It is cheaper for them since the amplifier to drive them will also need to be less powerful and cheaper to build, same goes for the cheaper speakers they use.
      • The included audio harness connector kit which will allow you to connect a more powerful amplifier to the existing speaker wiring in your car is included here
        • This will prevent you from having to rewire all ten speakers in the car.  You can use the existing wiring in the car and even the existing speaker connectors, no need to cut the off or modify them.
        • The existing wiring in the car can handle the more powerful speakers.

    NOTE 2:  If you plan to keep the original factory radio unit (head unit) in your car, you will need to buy an LOC (line output converter $30-$100 depending on the model you choose, there are many on the market) to condition the signal from the BMW radio to your new amplifier.  The AudioControl LC7i or LC6i units are recommended but there are many others in the market.

    NOTE 3:  Be aware that these kits are made to order so it can take up to two weeks to source, build and ship.  Very low inventory is kept due to the high custom nature of this kit based on customer preference and type of car.

    NOTE 4:  The kit shown is specific for E46 convertibles but you should specify if you want it for an E46 sedan or coupe with a few exceptions:

    • If you are buying for a coupe or sedan and want rear woofers, you should add $50 to your order since the rear woofers are bigger and more powerful than those of the convertible.
    • Due to lack of access to a sedan or coupe test car for fitting, no instructions are available on how to fit the rear woofers to a those cars, but it can be done if you are mechanically inclined or have do-it-yourself skills, you'll have to be creative or contact a professional installer for that task.  You can also order the kit without rear woofers (just rear tweeters) and get your own rear woofers from Crutchfield.com.
    • The included wiring harness kit will work with the sedan, coupe or convertible.
    • The rear tweeters will fit a sedan, coupe or convertible.

    NOTE 5: This is a DIY (Do It Yourself) Level Project Kit

    • Customers should be comfortable with using simple tools such as a screwdriver, pliers, a ratchet and a low power electric soldering iron for some wiring connections on the kit (not the car)
    • Professional installation is recommended if you are not comfortable with these basic tasks.
    • These speakers will fit your car (see notes further down), they have been tested for fit.  Other eBay sellers have not tried to fit their speakers or don't have detailed instructions on how to install them, leaving you to do all the work to figure out how to install them.

    Optional Subwoofer Kit (for Convertibles only)

    If you install a 5-channel or 3-channel amplifier (where one channel is for a subwoofer) or a mono-channel amplifier just for a subwoofer, you can also buy this kit below.  It includes a machine cut and CAD designed bracket and all bolts and washers needed.  It attaches to your car's existing frame, NO MODIFICATION TO YOUR CAR REQUIRED.   Just specify the rear cutout hole for your subwoofer.  This bracket can handle subwoofers as large as 12" (twelve inches) in diameter.  This subwoofer bracket kit is about $50.

    See these other listings on eBay:

    www.ebay.com/itm/153869304073

    www.ebay.com/itm/152211521652

    Warranty: ONE YEAR*

    Returns:

    • Returns are allowed for all items in kit as well as auditioned speakers per below within 30 days.  One year warranty on all kit items.

    Auditioning Your-Speakers

    Must "audition" a speaker without scratching or marking it. You can do so by getting it into the speaker cabinet or automobile as these speakers are often utilized and listening to it play without actually mounting it with screws or making permanent electronic connections (you can tape the connectors to your wires, or wrap a wire through and around the speaker connectors).  This is not an optimal way to listen to a speaker, but will give you the opportunity to identity major response problems or poor tonal characteristics prior to mounting or installing.

      • The speaker must be in like new condition. This includes no mounting marks nor scratches (especially around the mounting holes), no solder or marks on the connectors, no sealing caulk, dirt, sawdust or other debris.
      •  Speakers showing mounting marks or other indications of use will be evaluated and a restocking fee, starting at 25%, deducted from the refund amount.  In extreme cases, no refund or credit may be offered.
      •  Original cartons, outer shipping cartons, and boxes, (Including factory packaging, foam, fillers, and padding), hardware such as grills, screws, and printed material, manuals and instructions must accompany the returned speaker(s) or kit. Fees imposed on us by our supplier for replacing packaging, hardware or printed material will be deducted from the refund amount
      • To ship it, package the product to protect it from damage. Insure the package for the value of the product.  In the event that the returned-package is damaged in route to us due to insufficient packaging, customer should file a claim with the shipper.  Insufficient packaging may be cause for some shippers such as UPS to deny damage claims.
      •  Speaker defects occur even in-the most expensive of speakers from the most respected names in the business.  Contact us immediately if you suspect you have received a defective speaker.  A speaker with a burned voice-coil is not returnable for exchange, repair, refund, or credit, this is not covered by its warranty: No exceptions. While we do not accept returns on speakers with burned voice coils they may be returned, postage prepaid, for evaluation.
    Characteristics of a burned voice coil:
        • Distinct burnt odor
        • Discolored or black spider around base of cone