THIS IS IT!!!
-THE NEW-
"TRX250R & ATC250R 150PC BOLT KIT"
![photo Untitled-1_zpseb2467c8.jpg](https://i229.photobucket.com/albums/ee108/seaduke/Untitled-1_zpseb2467c8.jpg)
This 150 piece HIGH QUALITY OEM style bolt kit is recommended for all...
HONDA TRX250R FOURTRAX AND ATC250R
MODELS
![](https://i229.photobucket.com/albums/ee108/seaduke/250RGROUP2.jpg)
Designed to help you maintain and restore your TRX250R OR ATC250R using the original type fasteners.
This 150 piece HIGH QUALITY OEM style bolt kit is recommended for all...
HONDA TRX250R AND ATC250R
![photo red-honda-250r-qotm-atv-side-naked500_zps36171ac4.jpg](https://i229.photobucket.com/albums/ee108/seaduke/red-honda-250r-qotm-atv-side-naked500_zps36171ac4.jpg)
Designed to help you maintain and restore your Honda Fourtrax TRX250R & ATC250R sport ATV with OEM type fasteners.
This Specbolt 150pc kit was designed to work for all 1986-1989 TRX250R and all ATC250R
This all new Specbolt 150pc kit is based off our original 120pc TRX250R kit, but with some very worthwhile upgrades.
Check it out!!!
Upgrades from our 120pc kits include:
![photo LUGKIT1600PX_zps23a245a2.jpg](https://i229.photobucket.com/albums/ee108/seaduke/LUGKIT1600PX_zps23a245a2.jpg)
Full 32pc Lug Nut kit with taper spacers ($10.00 value)
These can be used with OEM or aftermarket wheels.
![photo head-nuts_zps046cfda3.jpg](https://i229.photobucket.com/albums/ee108/seaduke/head-nuts_zps046cfda3.jpg)
Plus a full set of 6 Stainless steel polished M8 cap nuts for your 250R cylinder head.
![grab bar bolts photo bumper-bolts-500px_zps176e1d26.jpg](https://i229.photobucket.com/albums/ee108/seaduke/bumper-bolts-500px_zps176e1d26.jpg)
Four M8x12 & Four M8x16 flange bolts to fit grab bars, bumpers skid plates, front motor mount plates, etc...
![photo DSC06833_zpsf87ae054.jpg](https://i229.photobucket.com/albums/ee108/seaduke/DSC06833_zpsf87ae054.jpg)
One spare M10x40 foot-peg bolt and 2 spare M8x35 swing arm pinch bolts.
![photo BLACK-SCREWS-400_zps12e02da7.jpg](https://i229.photobucket.com/albums/ee108/seaduke/BLACK-SCREWS-400_zps12e02da7.jpg)
6 Black M6x20 truss head screws for plastics, mud-flaps, heel guards etc...
...PLUS all the other essential stuff like bolts for plastic body panels, fenders, seat, body bolts and fender washers, engine side cover bolts, radiator bolts, shifter bolt, cylinder head nuts, exhaust bolts, various handlebar clamp bolts, 4 correct carb bowl screws, bolts for controls, most fuel tank bolts
![](https://i229.photobucket.com/albums/ee108/seaduke/specbolt.gif)
FREQUENTLY ASKED QUESTIONS
-What is an OEM matching bolt?-
OEM matching bolts have the same design and look of your original bolts. Our OEM style bolts are designed to match exact factory sizes with the same head style and strength ratings (8.8 or 10.9 grade) that originally came on your motorcycle. They all meet or exceed the factory specs.
These are all heat treated and zinc plated to look great, resist corrosion, and last the life of your motorcycle or ATV.
-Can I find these at a local hardware store?-
As most of us know from experience, OEM style fasteners are not available at our local hardware stores. The metric fasteners found at Ace or Home Depot are not going to match.
These fasteners are usually only found at the cycle dealerships and expensive to purchase on an individual basis.
It's great to have the right fasteners on hand when you need them.
-What about OEM style nuts?-
Besides the full set of lug-nuts, you get a generous assortment of both locking and non locking nuts in M5, M6, M8, and M10 sizes.
-What about metric washers?-
Washers are important for many things including plastics and bodywork, engine, and exhaust mounts. We include a nice variety of the most commonly found washers used on your bike.
-Will I get any sealing washers?-
Specbolt 150pc kits contain copper and aluminum soft tempered compression washers. 2 each of 3 different, most needed sizes. The size are M6x11 copper typically used for your coolant drain bolts or oil height check bolt, M8x15 aluminum used for oil drain plugs, and M10x14.5 aluminum for hydraulic brake lines, etc...
-What if I have aftermarket parts on my bike?-
Specbolt kits include some additional sizes to fit some of the aftermarket items on your bike as well...such as nerf bars, exhaust, etc ... If you want to be sure to get the right size fasteners for your specific aftermarket part...just ask. We strive to get you everything you need.
-Will I get every nut and bolt found on my bike? What isn't included?-
This kit is designed as a maintenance kit and is a great assortment most of the commonly used fasteners found on your bike. It is not a full on restoration kit. It doesn't include shock or suspension/linkage bolts, axles/axle nuts, swing-arm bolt, or any long case bolts over 40mm.
-What if I want to customize my kit or request more of a certain type of fastener?-
Not a problem...If you have any special needs or want to request certain sizes just send me an email or call me. I will do my best to create a custom kit with your specific needs in mind.
-What if I run low on a certain fastener. Can I get refill packs?-
Yes... I offer every one of our fastener sizes in convenient and economical refill packs. Just send me an email, check the website, or call me.
-FREE PRIORITY SHIPPING TO ANYWHERE IN THE USA-
GET IT EVEN FASTER (1 or 2 days)WITH ECONOMICAL USPS EXPRESS MAIL.
-FAST International Priority and Express shipping options-
We will absolutely mail your kit the same or next business day so you will get it fast!
Don't get caught working on your bike and not having the right fasteners again!!!