This is all you need to install your own Flame kit , You don't need to spend £70.00 + on fancy kits We have put together all the components you will need to fit a simple but highly effective flame kit , you just need to add your own wire and terminals Car show in Demo has our simple kit fitted. Comes with easy to follow instructions and can be fitted in under 1 hour Apart from a bit of wiring the only thing you need to do is drill a hole in the exhaust and weld the nut that holds the spark plug . Suitable Cars with Petrol engines and a single Ignition coil . It is not suitable for cars with multiple coils or coil packs . We put this kit together to work on our own show cars with traditional distributors and coils and we will provide simple instructions as to how to fit but please note we can't give information about specific cars or other set ups It works by diverting the signal going to the coil to a extra the coil at the back of car to spark the exhaust plug , You will note from the video that while the flame is on the engine is cut . Flame kits are for off Road and Show use only . http://www.youtube.com/watch?v=MJl87DoqQ_0&feature=player_embedded