Clear Sticky Back Plastic Emergency Glass Safety Repair Window Film 76cm x 4m

Emergency Glass Repair Film,

 

This film is an optically clear, self adhesive, window film, specifically designed to be placed on already broken and cracked glass windows, it will temporary make the glass safe, helping to stabilise the glass integrity, weather proofing it until the glass can be replaced. The Film is fitted in the same manner as other window films and full fitting instructions will be included with your order. The adhesive on this film is extremely strong, it has twice the hold of a conventional safety window film.


Already in use in, schools, hospitals and commercial premises making glass safe and weather proof after breakage until repairs can take place.

This film can also fitted to Mirrors  in public spaces, such as sports facilities, swimming pools and lifts must comply with higher than ordinary glass safety and security requirements.


The film is specially designed to be applied to the back of mirrors, providing protection by holding shattered glass in place in the event of an explosion, fire or impact.

We can offer in other sizes, Please send us an ebay message for a quote. 

 

TECHNICAL DATASHEET

 

Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)

Ultraviolet transmission

5 %

Visible light transmission

85 %

Reflection of external visible light

11 %

Reflection of internal visible light

11 %

Total solar energy rejected

19 %

Total solar energy rejected 2

20 %

Solar ratio :

    Solar energy reflection

9 %

    Solar energy absorption

14 %

    Solar energy transmission

77 %

Reduction in Solar Glare

14 %

g-value

0.83

u-value

5.7

Shading coefficient

0.9

Installation type

Internal application

Roll length

50 m

PET / PVC composition

PET

Thickness

100 μ

Colour : TRANSPARENT

 

Need the tools to fit this? Don't worry click here only £9.99 for our basic tool kit everything you need for a professional finish.


BRIEF FITTING INSTRUCTIONS


Tools needed, can be purchased from us, from the link above:-


- knife
- Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution’
- Squeegee

Method:


1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife