Filters' Specifications:
Filter 1: 10" polypropylene foam filter cartridge removes sand, rust, silt and other sediments up to 5 Micron
Filter 2: 10" activated carbon block filter. The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.
Filter 3: 10" activated carbon filter removes 98% to 99% of free chlorine, chlorinated solvents, aromatic hydrocarbons, as well as up to 85% of pesticides of chlorogenic origin, polyaromatic compounds, phenol, benzene and organic substances.
Filter 4: Reverse Osmosis high quality membrane (we offer 50, 75, 100 and 150 GPD membranes). The membrane holds up to 99.9% of contamination from feed water. It successfully removes harmful organic and non-organic compounds, heavy metals and some bacteria and viruses. The efficiency of the membrane is shown in GPD units (US gallons per day)
Filter 5: In-line post carbon filter – improves the taste, colour and smell of water stored in the storage tank
Filter 6: In-line mineralizing filter that enriches the daily water requirement with minerals such as calcium, magnesium, sodium and potassium
The recommended replacement cartridges /depends on water usage and its condition/:
-Pre/ post filters: every 6 months
-RO membrane: every 2-3 years
6 RODW Water Filter is a complete, ready to use device.
Quick and easy to install.
Specifications:
- Filtration stages: 6
- Pressure: 2.8-6 bar
- Water temperature 2-45°C
- pH range: 4-10
- Capacity (at optimal conditions) 50GPD- 150GPD - depending on the selected membrane
- Dimensions:
Unit height: ~46 cm, width: 37 cm, depth: 15 cm
Storage tank ~ height 35 cm, diameter 24 cm
- Safety standards compliant