Welcome to my shop!
Tips/Hints:
To combine shipping, use the basket.
Use the drop-down QTY/LOT menu, instead of Quantity box to use the quantitative discount.
If you have any technical or other questions, do not hesitate to contact me.
I am trying keep pictures 99.9% accurate!
For my other items, check HERE.
Datasheets:
Description:
- This Board is used to protect lithium cells from Full Discharge, Over-Charging, Over-current and Short Circuit
- Suitable for Lithium Batteries with nominal voltage of 3.6V, 3.7V, 3.8V and charge up to 4.2V per cell
- Need basic soldering skills to wire the board
- Input voltage: 8.4V regulated from Constant Current and Constant Voltage source
Welding points:
B+ : Battery Positive
B- : Battery Negative
P+ : Charger/Load Positive
P- : Charger/Load Negative
BM : Battery middle: First cell (counted from B-) Positive or where is first and second cell connection, middle connection
Parameters table:
| No. | Parameter | Nominal Values |
| 1 | Voltage | Charging voltage | DC: 8.4V CC / CV |
| Single balanced voltage | n/a |
| 2 | Electric current | Single equalizing currents | n/a |
| Single battery consumption (self-consumption) | n/a |
| Maximum continuous discharge current | n/a |
| 3 | Overcharge protection | Overcharge detection voltage | 4.275 V ± 0.025V |
| Overcharge detection delay time | 150-500 ms |
| Overcharge recovery voltage | 4.075V ± 0.025V |
| 4 | Over-discharge protection | Overdischarge detection voltage | 2.90V ± 0.1V |
| Over discharge detection delay time | 50-150ms |
| Over-discharge recovery voltage | 3.00V ± 0.10V |
| 5 | Overcurrent protection | Overcurrent detection voltage | 150 ± 30mv |
| Over current detection current | 4 ± 0.5A |
| Overcurrent detection delay time | 5ms-15ms |
| Restore state | Automatic recovery |
| 6 | Short circuit protection | Detection Status | External short circuit |
| Detection delay time | ≤50us |
| Restore state | Automatic recovery |
| 7 | Resistance | Protection lines (MOS-FET) | ≤60mΩ |
| 8 | temperature | Operating temperature range | -40 ~ + 50 ℃ |
| Storage temperature range | -40 ~ + 90 ℃ |
| 9 | Size (L * W * H) | 18 * 18 * 3mm |
* Board is using 2120CB Chip to control the cells with 2x 8205A MOSFET.
* After connecting the cells may need to connect the charger to activate the board
* Have fun!
For a LOT You will receive:
Colors/type/style/model/pattern as pictured
1x protection board