Quantity | Four (4) Pieces |
Spacer Thickness | 2.0" (50mm) |
Center Bore | 66.1mm |
Bolt Pattern | 5x114.3 |
Thread Size of Studs/Nuts | 12x1.25 |
NISSAN
1995-1998 240SX (Will NOT fit Base Models)
1987-1996 300ZX
2003-2009 350Z (Requires removal of front rotor wheel guide bolt)
2009-2021 370Z (Requires removal of front rotor wheel guide bolt)
2002-2021 Altima
1989-2021 Maxima
2003-2019 Murano
2008-2021 Rogue
2007-2011 Sentra (SE-R & SE-R Spec V ONLY)
2012-2021 Sentra
INFINITI
2003-2014 FX35
2003-2009 FX45
2009-2014 FX50
2003-2008 G35
2008-2014 G37
1996-2005 I30
2002-2005 I35
1992-1997 J30
2003-2011 M45
1990-2008 Q45
2014-2021 Q50
2014-2021 Q60
2014-2019 Q70
2014-2020 QX60
2014-2019 QX70
Your vehicle may have different thread pitch wheel studs than what is supplied with the spacers in our listing. If this is the case, you will need to purchase the correct lug nuts for proper installation.
If vehicle's wheel studs are longer than 2.0" (50mm), the wheel studs either need to be trimmed or replaced with shorter ones.
Buyer must take careful measurements to ensure this 2.0" (50mm) spacer is compatible with their wheels/tires. They must make sure it will not push their wheels or tires out too far as to cause it to hit their fender or any other part of their vehicle.
Installation should only be performed by a trained professional with sufficient knowledge of your vehicle and these items
No Returns / Exchanges after installation.