ModuleMe Electronic

5A 6A 8A 10A 15A DC-DC Boost Converter Step Up Power Adjustable portable charger

600w step up
Input voltage : 10V -60V
Input Current: Maximum input current of 15A
Output voltage : 12V -80V continuously adjustable
Output current: maximum output current of 10A ( adjustable )
Output power: the effective power P = input voltage V * 10A
Conversion efficiency: up to 95% ( input voltage, current; output voltage and current impact of conversion efficiency )
Short circuit protection : Fuse
Weight :251g
3.5-30V to 4.0-30V 5A
Indicators:

1.Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)

2.Output voltage range: 4.0V-30V

3.Input maximum current: 5A (based on power conservation under nominal conditions the output current
Uin * Iin * efficiency = Uout * Iout)

5.Continuous operating current: 3A (good ventilation conditions, the output voltage and input voltage ratio can not be greater than 3)

6.Around 90% of the full load efficiency

Application examples:

The 7.4V boost 12V applications in Aeromodelling camera.

Efficient booster circuit adjustable DC-DC boost the input voltage (4 to 30) V
adjustable output (5 to 30) the V input Maximum input current 5A efficiency up to 92%,
using the dedicated package boost chip beyond the LM2577,
not bean large boost IC performance and output drive power up to 30W.
4.5V-32V to 5-42V 6A

Specification:

  • Module property:Non-isolated step up module(boost)
  • Input voltage:4.5V-32V
  • Input current:0A-6A
  • Output voltage:5V-42V
  • Output current:0A-6A
  • Working temperature:-40℃~+85℃
  • Working frequency:180KHz
  • Transfer efficiency:94%(max)
  • Short circuit protection:Yes
  • Over temperature protection:Yes
  • Input reverse protection:NO
  • PCB size:60x60x20mm



6-32V to 6-42V 8A

The isolation booster module
The highest conversion efficiency：96%
Input voltage：6~32（max 35V）
Output voltage: 6~42（max 52V）
Maximum input current: 8A
maximum current output: 5A
Static working current: 15mA
Power :70W
To adapt to the environment:-40~+85℃
Working frequency: 150KHz

Characterization:
 
Adopt high-frequency electrolytic capacitor reduce the ripple value, more stable output voltage;
Provide reverse connect protection, avoid the equipment damage caused by incorrect operation;
Stops booster, soft short circuit protection, short circuit, automatic recovery when short circuit faults remove;
With access to electricity, the LED indicator light, easy to understand

way to install：4*M3 screw
Connection mode: welding output terminals free
Module size: 30 mm high 20 mm long 60 mm wide
8.5-48V to 10-50V 10A

Module name :250W boost constant current module

Module properties: non-isolated step-up module (BOOST)

Input voltage: DC8.5V-48V

Input current: 10A (MAX) exceeds 8A please enhance heat dissipation

Quiescent current: 10mA (12V liter 20V, the output voltage, the higher
the current will increase too quiet)

Output voltage: 10-50V continuously adjustable

Constant] range: 0.2-8A

Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)

Operating frequency: 150KHz

Conversion efficiency: up to 96%

Overcurrent protection: There

Input reverse polarity protection: Yes,

Installation: 4 3mm screw holes

Connection method: Connection Output

Module size: Length 70mm width 36mm height 13mm

Single module: 50 g

Package includes;

1*DC-DC Boost Converter Step Up Power Adjustable portable charger

  1. We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  2. Payment must be received in 5 business days of auction closing.
  3. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  4. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
  1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
  1. All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  2. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  3. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques