The deluxe 5400-series mill is our most popular mill. It comes equipped with all of Sherline’s standard features upgraded to include a laser engraved 12″ (305mm) solid aluminum base for 2″ or additional Y-axis travel, laser engraved scales on the table and base, 2-1/2″ (63mm) adjustable “zero” handwheel on the Z-axis and 2″ (51mm) adjustable “zero” handwheels on the X- and Y-axes, a mill headstock spacer to provide more throat distance and a 1/4″ drill chuck and drawbolt.
All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed.
New Mill Features
Made in the USA!
FEATURE |
5000(5100) |
5400(5410) |
2000 (2010) |
Max clearance, table to spindle |
8.00" (203 mm) |
8.00" (203 mm) |
9.00" (229 mm) |
Throat (without headstock spacer) | 2.25" (50 mm) | 2.25" (50 mm) | Adjustable |
Throat (with headstock spacer block) | (Not included) | Included, 3.50" (89 mm) | Not Required |
Travel, "X" Axis |
9.00" (228 mm) |
9.00" (228 mm) |
9.00" (229 mm) |
Travel, "Y" Axis |
3.00" (76 mm) |
5.00" (127 mm) |
7.00" (178 mm) |
Travel, "Z" Axis |
6.25" (159 mm) |
6.25" (159 mm). |
5.38" (137 mm) |
Hole through spindle |
.405" (10 mm) |
.405" (10 mm) |
.405 (10 mm) |
Spindle nose thread |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
3/4-16 T.P.I. |
Spindle taper |
#1 Morse |
#1 Morse. |
#1 Morse |
Handwheel graduations |
.001" (.01 mm) |
.001" (.01 mm) |
.001" (.01 mm) |
Width overall* |
14.75" (375 mm) |
15.00" (381 mm) |
15.00 (381 mm) |
Depth overall* |
11.75" (298 mm) |
14.00" (356 mm) |
22.25" (565 mm) |
Height overall* |
20.75" (527 mm) |
20.75" (527 mm) |
23.38" (568 mm) |
Table size |
2.75" x 13.00" (70 x 330 mm) |
2.75" x 13.00" (70 x 330 mm) |
2.75" x 13.00" (70 x 330 mm) |
Hold down provision |
2 "T" Slots |
2 "T" Slots |
2 "T" Slots |
Shipping weight |
33 lb. (15.0 kg) |
36 lb. (16.3 kg) |
38 lb. (17.2 kg) |
Movements in addition to X-, Y- and Z-axes |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right |
Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 5.5" column travel (in/out) |
Motor | 90 volt DC with electronic speed control automatically converts any input from 100 VAC to 240 VAC, 50 or 60 Hz. | ||
Spindle speed range |
70-2800 RPM continuously variable by electronic speed control |