DP-Brakes OEM Quality HH+ Compound Sintered Front Brake Pads

DP's Standard OEM replacement sintered metal HH+ compound brake pads provide excellent all-round braking hot or cold, wet or dry. A high-tech ceramic heat shield is applied to the rear of each backplate to reduce the heat transfer into the fluid and prevent brake fade. They have one of the lowest wear rates on the market yet are not agressive on discs. Very low levels of brake dust and no noise and no thermal cycle bedding-in required are also benefits of these excellent pads

Product Description

Suitable for Moto-x, Enduro, Hare Scrambles, Cross-Country, Supercross, Dual-Sport and Trial Riding.

Industry High HH+ friction rating

Low wear rate

Reduced brake dust

High-tech ceramic heat shield

Strong initial bite

Very progressive, controllable feel

About DP Brakes:

If someone were to list motorcycling's five most significant innovations, disc brakes would surely be included near the top. Oddly though, as far as disc brakes are concerned, it took the motorcycle industry two decades to catch up with the rest of the mechanized world. The automotive and aircraft industries have been using disc brakes since the 1940's. It wasn't until the late 1960's that disc brakes became popular among motorcycle manufacturers.

Actually, the aircraft industry should be credited for pioneering disc brake technology and it was Dunlop Aviation in England who did the pioneering. When World War II began, aircraft still used expanding drum brakes but as war planes got heavier and faster, it was obvious that a new type of brake system was necessary. Dunlop Aviation took up the challenge and by the late 1940's had developed the disc brake.

Even though disc brakes improved braking performance, further improvement was necessary for wet conditions. Dunlop Aviation again took the initiative, introducing sintered metal disc brake pads in 1955.

The ability of this new material to penetrate the film of water that forms on a disc was a major improvement over the organic friction materials. Based on this success, Dunlop Aviation was later commissioned by the British Government to incorporate sintered disc brake technology for motorcycle applications. Thus was born DP BRAKES.

To this day sintered metal still provides state-of-the-art braking performance. The world's major motorcycle manufacturers have recognized the benefits of sintered metal. Today, over 95 percent of motorcycles produced are fitted with sintered metal brake pads as original equipment.

DP BRAKES position in the motorcycle market is unique because it is the only manufacturer that concentrates 100 percent of its production on sintered metal pads.

This makes DP BRAKES the ideal replacement for the sintered metal brake pads fitted as original equipment.

Please check the listing title for the exact models & years that these brake pads will fit, if you are in any doubt please send me a message through eBay

SMOKN LTD

Designers & manufacturers of

Left Hand Rear Brake Systems

Quick Release Number Plate Brackets

Easy Adjust Air and Idle Screws

____________________________________________

In addition to our own unique products we also sell a huge range of parts & accessories from the best brands in the industry

Our eBay shop is constantly growing but if you don't see what you are looking for please get in touch as I can probably do a listing for what you need.

I am also able to combine postage on multiple purchases to save you money

______________________________________________

If you have any questions please feel free to contact me through eBay messages 

or if you would prefer to phone you will find my 

contact telephone number in the Business seller information

section of every listing

Thanks for taking the time to look!

http://stores.ebay.co.uk/SMOKN-UK