Audi S-line, RS, TTS or TTRS Side Stipe Decals / Stickers
Listing is for 1 kit of 2 stripes approx. 1840mm x 100mm
Made from Superior Quality Cast Vinyl
Self Adhesive, Easy to Fit, No Mess !!
Stripe Colours
Black White Red Silver(Met) Dark Grey(Met) Gold(Met) Yellow Dark Blue Bright Blue Orange Lime
Logo Colours
Black + Red White + Red Silver(Met) + Red Dark Grey(Met) + Red
How to Order
1. Buy from the listing
2. Use the 'ask seller a question' form at the bottom of this page
3. State the Logo required (S-line, RS, TTS or TTRS)
4. State what colour you want for the Stripes
5. State what colour you want for the Logo (Black, White, Silver or Dark Grey)
Your item cannot be dispatched until we know your colour choice
Benefits of Superior Cast Vinyl
Lifespan 8 - 12 years
Shrinks No (never)
Superior Adhesive Yes
Thinner Yes
More Durable Yes
Heat Resistant Yes
Weather Resistant Yes
Stronger Colours Yes
Remember! If it's not Cast, it's not Quality!
Fitting Instructions
Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease.
Cut the sheet into individual stripes.
Use masking tape to hold the stripe in the desired position on the car.
Run masking tape along the entire length of the stripe on the bottom edge.
Allow the stripe to hang from this tape so the backing paper can be peeled off.
Hold the stripe up and begin to press into position with the squeegee provided.
If the surface you are applying to is cold, heat with a hairdryer, then sqeegee all over again.
Peel off the application paper with care.
If there are any air bubbles simply prick with a needle and push the air out.
Repeat the process with the logos.
Repeat with the red parts which are fitted with clear application tape to aid alignment.
DO NOT wash for at least 24 hours to allow the adhesive to cure.