Tubular High Clearance Steel Control Arms for 2-3" Lift Height
10-13 Dodge Ram 2500/3500 4WD
This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers.
If your front tires are close to rubbing the fenders near your doors, you may need our high clearance arms to properly re-center your axle!
 Our ARMS are guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck. Some of these lower cost competitors buy their "One Size Fits All" arms from China. Stryker is proud of our MADE IN THE USA sourcing. If you see a kit with lots of extra parts you might consider one exclusively designed for your truck. Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! Many competitors even use lower cost Rubber Bushings. These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2", 2-3", 3 1/12" to 5" and 5 1/2" to 7" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! That's correct, Stryker designs and manufacturers a Fabricated control arm to match your truck. In OUR world of Rugged Style ONE SIZE DOES NOT FIT ALL TRUCKS! |
 Stryker is confident in offering you a LIFETIME WARRANTY on our Fabricated control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!
|
- Properly centers front axle within wheel well
- Stronger than factory stamped steel arms
- Beefy tubular steel construction w/ DOM collars
- Lower high clearance arms constructed entirely of DOM material
- Daystar brand PTMEG poly bushings
- Year-model-specific DOM sleeves
- Greasable zerk fittings pre-installed
- Made in the USA!
Description:
Our strong tubular steel construction control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in!
Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within!
These arms are precisely the proper length to center your front axle within the wheel well at 2-3" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence!
If you've installed a 2-3" leveling kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle!
High Clearance Arms:
High clearance arms are the perfect solution if you need more tire clearance at the lower control arm - they can accommodate larger tires on stock wheels, or aftermarket wheels with stock or near stock offsets. Lower arms are constructed entirely of heavy wall DOM tubing, with a precision bend at the crucial spot needed for additional clearance.
Kit Contents:
(2) Upper Control Arms
(2) Lower High Clearance Control Arms
Fitment:
10-13 Dodge Ram 2500/3500 4WD
Technical Notes:
Does not fit 2013 Ram 3500 Dually models; Also fits all Mega Cab models; Re-uses factory hardware