CUTTING TYPE	True Tangential with Drag Knife Cutting Mode Capability
CUTTING WIDTHS			S2 T140 53 inch (135 cm), (Extended Mode: width of the material)
CUTTING SPEED	All S2 models cut at speeds up to 56 inches (1414 mm) per second diagonal
AXIAL SPEED	Up to 4 G
MAXIMUM ACCELERATION	Up to 5.5 G diagonal
ALIGNMENT TYPE	OPOS - CAM : Factory upgrade on all new Summa S Class 2 S75T, S140T and S160T Barcode Jobrecognition Up to 2 x 64 marks on the X-line Y-Line compensation
TRACKING PERFORMANCE	Within ± 0.004 in. (± 0.1 mm) on plots up to 40 ft. long (12 m) on rolls up to 760 mm wide long up to 4 m long (13 ft.) on rolls over 760 mm wide
ACCURACY	0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE	0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE	English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Lithuanian; Portuguese
CONNECTIVITY	USB; Ethernet
POWER REQUIREMENTS	100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS			S2 T140 225 (W) x 68 (D) x 111 (H) cm 73.6 (W) x 26.8 (D) x 43.7 (H) in.
SHIPPING WEIGHT			S2 T140 198 lbs (90 kg)
OPERATING TEMPERATURE	59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES	WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Pouncing Pin and Holder, Stand and Basket.
OPTIONAL ACCESSORIES			Roll-up system for Summa S Class 2 140 and Summa S Class 2 160