Model Bars X20. approx 2500 grams in weight (125 grams each approximately).

Very easy to use. This is an excellent choice for beginners to hobby casting.

PRODUCT CODE: 2047 (x20 bars)

CONTENTS: 20 bars of casting Model metal. Ideal for use with our rubber moulds available in our Ebay shop.

A single bar can cast about 9x 25mm single figures, 5x 40mm scale single figures, 2 and a half 54mm single figures. Ingates should be remelted between castings.

This is perfect for casting a full 54mm scale 32 piece chess set or a large amount of soldiers.

Model Metal (54% Lead / 11% Tin / 35% Bismuth) is specially designed for figure casting. It has a low melting point and very low shrinkage giving you high detailed casting. Model metal melts at 138°C (280°F).

CASTING GUIDE: (mould not included but available in my ebay shop)    

   
• Apply release powder to both mould halves evenly.
      
• Gently clap the moulds together to remove excess powder.
      
• Add the two support boards to the sides of the moulds and hold firmly together with the metal clamps.
      
• Melt metal in the casting ladle. Use a worn match to check that the metal is at the correct temperature. If the match smokes lightly when placed in the metal it means that it is ready to pour.
      
• Pour carefully into the mould holes and tap lightly to settle metal.
      
• When cool (5 minutes), open the mould and bend the mould away from the figure to remove it.
      
• Clip away any excess metal off the figure and base, file to keep base flat.
      
• Polish with a wire brush. (wire snips, file and brush not included)
      
• Your figure is ready to paint. We advise undercoating it first and varnishing it when finished painting to protect it.
 

SHIPPING INFORMATION:    We ship any orders received from Monday to Friday, 9 to 5 p.m GMT. We are shut Saturdays, Sundays and Irish Bank Holidays.    Any orders or questions sent in will be dealt with the next work day. Shipping in European Union can take up to 21 days. Most packages arrive within 7 work days however.

COMBINED POSTAGE:    We will gladly combine postage for moulds and accessories, please contact us for a quote, due to the weight of many of these items we need to know your postal destination and quantity wanted before offering discounts. However we normally would charge the full price on the most expensive postal item and 25% off the following items postage.

CASTING WARNING: Metal casting is NOT a toy. Prince August Model Metal & Standard Metal contain lead and are recommended for children over 14 years. Adult supervision is needed. Protect worktops from hot metal    by covering then with a newspaper or a sheet of hard board. Any spilled metal can be removed after it cooled down. Do not cool down the metal or mould with water. Explosion Risk!. Moulds and metal taken from cold storage should be allowed to warm up before use by leaving them in a warm room. Safety tested under En71.