300 Micron Bomb Blast Safety Window Film

Bomb Blast, our Thickest Safety film, this is one seriously thick product, designed to mitigate risk from explosions and acts of terrorism. For the film to be effective in such situations it will need to be adequately anchored to the frame. Anchoring solutions are available in a variety of options, including wet sealing, Flexible edge retention systems, and Rigid edge retention.

This product is professional installer quality and fully certified and tested. It is available in 2 widths 76cm and 152cm.

Once applied, the film will upgrade existing glassing to meet British & EU standard  certification:-

BS 6206 Class A and BS EN 12600 Class 1B1.

Thickness: 300 micron/12mil Tensile Strength at Break: 28,000 psi Break Strength 336 lb/inch Elongation at Break 125% Peel Strength 7 lb/inch

This film can be applied to any flat glass surface to increase the structural integrity and security of home, office and vehicle glass. Our 300-micron security film creates a 'safety net' which holds shards of glass in place upon impact. The Window Film will make it safer for occupants and reduces the risk of vandalism and burglaries. This film is an inexpensive way to upgrade any window and is used worldwide in banks and offices. The film is easy to install, and can be cut to any shape or size. It is completely transparent, so does not obstruct vision from inside or out.


Safety Window Film 300 micron is ideal for public shops, buildings, offices, supermarkets, shopping centres, cafes, restaurants, cinemas etc. This is a lifesaving product, it can protect members of the general public and staff, in a variety of settings, including, terrorism, natural disasters, examples:- hurricanes /Storms and many other forces accidental or intentional. We recommend in investing in some professional tools when fitting this particular product, its thickness by nature makes it a more difficult product to foit and work with.

  • Self Adhesive Film
  • Allows natural light through the film

Will be dispatched in 24hrs of purchas

This film is an inexpensive way to upgrade any window and is used worldwide in banks and offices. The film is easy to install, and can be cut to any shape or size. It is completely clear so does not obstruct vision from inside or out.

We also offer fitting tools and installation DVD guides available separately in our shop.


Full fitting instructions supplied with your order.


• Professional quality - as used by professional window film fitting companies. 
• Non Fade, Easy DIY install.
• Self Adhesive Film 
• Easy to cut & trim to size 
• Allows full light through the film

Film is transparent,


Optically clear film will hold glass together in the event of vandalism, smash and grab raids and break-ins, bomb blast


FITTING INSTRUCTIONS


Tools needed, can be purchased from us:


- knife
- Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution’
- Squeegee / Hard Card

Method:


1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife