Wheel Bolt Pattern:5x4.5''/5x114.3mm
Vehicle Bolt Pattern:5x4.5''/5x114.3mm
Thickness:15mm per spacer
Thread Pitch:M12x1.25
Quantity:4pcs per set
Hub/Center Bore:66.1mm, hubcentric
Studs:10.9 Grade, stronger than OEM 8.8 Grade
Material: 6061 T6 Billet Aerospace Aluminum
Surface Treatment:Anodized
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra
1995-1998 Nissan 240SX (Will NOT fit Base Models)
2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
2008-2013 Infiniti G37
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
Hubcentric designed.
It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
Be sure to torque the lug nuts to manufacturer specifications。
Avoid using an impact wrench; improper usage may cause damage to components。
Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
No returns or exchange once installed.
Installation should only be performed by a trained professional.
If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller).