Standard equipment for the model 4000 (4100 metric) lathe includes:
- A powerful 90V DC motor with electronic speed controller.
- 2.75″ (70mm) x 6.0″ (152mm) crosslide.
- 15″ (381mm) steel bed to allow 8″ (203mm) between centers.
- Standard 1-5/8″ (41mm) laser engraved aluminum handwheels.
- Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
The A Package Includes:
In additional to Model 4000 3.5″ x 8″ (Inch version) lathe and standard accessories you get:
- 2.5″ 3-jaw self-centering chuck
- 1/4″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
SPECIFICATIONS:
Swing Over Bed |
3.50″ (90 mm) |
Swing Over Carriage |
1.75″ (45 mm) |
Distance Between Centers |
8.00″ (200 mm) |
Hole Through Spindle |
.405″ (10 mm) |
Spindle Nose Thread |
3/4″-16 T.P.I. |
Spindle Nose Taper |
#1 Morse |
Spindle runout of Morse taper |
.0005″ or less |
Travel of Crosslide |
4.25″ (110 mm) |
Tailstock Spindle Taper |
#0 Morse |
Protractor Graduations |
0° to 45° by 5° |
Handwheel Graduations |
.001″ (.01 mm) |
Length Overall |
23.5″ (597 mm) |
Width Overall |
10.5″ (267 mm)
|
Height Overall |
8.5″ (216 mm) |
Shipping Weight |
24 lb. (10.9 kg |
Motor |
90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.
|
Spindle Speed Range |
70-2800 RPM continuously variable by electronic speed control |
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|
|
|
---|