Product Description   

Model 4000C DRO 3.5″ x 8″ lathe and standard accessories + Factory installed DRO + the "C" Package (INCH)
For Metric version search on eBay for PN 4010C-DRO

Standard equipment for the model 4000 lathe includes: 

  • A powerful 90V DC motor with electronic speed controller
  • 2.75″ (70mm) x 6.0″ (152mm) crosslide
  • 15″ (381mm) steel bed to allow 8″ (203mm) between centers
  • Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO lathes are outfitted with the special DRO 2″ (51mm) handwheels on the leadscrew and crosslide feed screw, and a standard 1-5/8″ (41mm) handwheel on the tailstock. Each handwheel has laser engraved aluminum handwheel collars
  • Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual

The C Package Includes:

Model 4000  3.5″ x 8″ lathe and standard accessories PLUS:

  • 2.5″ 3-jaw self-centering chuck
  • 1/4″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
  • Steady rest
  • Live Center
  • Compound Slide
  • Cutoff Tool and Holder
  • 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring)
  • 5/32″ T-driver
  • 3-pc Center Drill Set
  • Sherline Accessories Shop Guide Book (224 pages, B/W)
  • Thread Cutting Attachment

PLUS,

Factory installed 2 axis digital readout.

The advantage of a digital readout is that you no longer need to count handwheel rotations when moving distances longer than a single revolution. This helps eliminate math errors. The large, easy-to-read display reads out to 3 and a half decimal places to give accuracy to within .0005″. The display for each axis can be reset to zero at any time with the push of a button. Backlash values can be set for each axis in the programming so that backlash is electronically eliminated when changing direction of handwheel rotation. A third axis is available on the display box should you later decide to add a vertical milling column or use it on a Sherline 3-axis mill.The readout can function with inch or metric lathes. In the metric mode, the position reads out to 1/100 of a millimeter.

Specifications
Swing Over Bed 3.50″ (90 mm)
Swing Over Carriage 1.75″ (45 mm)
Distance Between Centers 8.00″ (200 mm)
Hole Through Spindle .405″ (10 mm)
Spindle Nose Thread 3/4″-16 T.P.I.
Spindle Nose Taper #1 Morse
Spindle runout of Morse taper .0005″ or less
Travel of Crosslide 4.25″ (110 mm)
Tailstock Spindle Taper #0 Morse
Protractor Graduations 0° to 45° by 5°
Handwheel Graduations .001″ (.01 mm)
Length Overall 23.5″ (597 mm)
Width Overall 10.5″ (267 mm)
Height Overall 8.5″ (216 mm)
Shipping Weight 33 lb. (15 kg)
Motor 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.

Warranty:

Includes1-year (from delivery date) of factory warranty on all mechanical components and 90 days warranty on all electronic components.
The usage is for prototyping or small quantity manufacturing.

Returns Policy:
Returns are accepted within 30 days. Buyer pays for all associated shipping cost. The item must be in the original packaging and in completely new, unused condition.