PORTABLE ELECTRIC
BRAKE CONTROLLER ASSEMBLY
Australia's
No1 selling Portable Brake Controller
Beware of cheap
knock offs, they are cheap because they are made quickly and cheaply,
our assemblies are strong, safe and durable:
-
We manufacture a bracket, attached to the
unit to stabilise and protect the controller wiring. Without this
feature, the controller wiring can quickly degenerate and break away
from the controller circuit board
-
We use 5mm twin core for the main loom,
others use only 4mm
-
We use 4mm 7 core at the plug and socket,
other use only 3mm
-
We use the correct terminology, we don’t
call plug and sockets ‘adaptors’
-
We offer a 3 year warranty on all parts
of the assembly
-
We have a proven track record, over 1300
5 star reviews and no false claims!
Please
check our eBay feedback for reassurance
or
give Dave a buz
24/7 with questions/queries
Details here:
portablebrakecontrollersaustralia.com
Standard 7 pin
configuration supplied, see website for any other required
combinations
Express Post
included
ADR compliant,
legal in all states and territories
ESC compatible
Sold Australia
wide for over 10 years - 30 years industry experience with proven
reliability
Suppliers to
National & International customers,
individuals, hire
companies and government bodies
Built strong -
Quality guarantee – money back if you’re not completely satisfied
The Connection Process:
Connection is simple. Plug into
your interior front accessory socket, run the main loom through
vehicle via boot, rear door (utes & dual cabs) under tailgate
etc., to the rear of your vehicle, plug to car, socket to trailer or
caravan etc. Use common sense to ensure there is not excess cable
overhang. The Brake Controller unit can be placed in the console
area, as long as it is within reach of the driver.
IMPORTANT:
· This
unit does not need to be mounted to function correctly. We can also
supply a cup holder brake controller mount – see our other listings
· Mounting
any objects under or around dash area may interfere with airbag
deployment – check with vehicle manufacturer for safety advice if
this is being considered
· Do
not run other accessories from the same plug and/or circuit, whilst
Portable Brake Controller is in use
· Operational
instructions supplied
· 5 minute setup
· Rated up to two
axle (4 brakes), caravans, trailers, horse floats etc
· 3 year Warranty
· A unique high
quality assembly
· bracketed wiring
loom to prevent damage
· soldered joints
· dual wall heat
shrink
· 5mm Aussie made
main loom
· 7 core plug tips
soldered
We don’t cut
corners!
Our system is
unique, our assembly process takes substantially more time and effort
than other sellers, we offer a no compromise approach to product
safety and quality.
Included is a
specifically manufactured bracket to stabilise the wiring loom from
controller to prevent twisting, pulling and degeneration.
The Controller:
Sturdy steel cradle Hayman Reese Brake Controller that
requires no levelling or mounting and is simple
to operate – other marketed portable kits (Tekonsha, Primus etc)
require east/west cabin mounting and/or leveling to function
correctly – insist on installation instructions if you are
told otherwise!
The Hayman Reese
Guardian Brake Controller from one of the biggest names in
the business - strong steel cradle construction, durable, a
convenient non intrusive shape and size, compact and reliable, simple
to operate and understand and gives you greater control over
your braking, with a large easy to read DIGITAL display and
push-button controls
Features
· Small
compact design
· Easily
accessible push buttons for controlling “output” and “sync” settings
· Easy-to-read
digital display communicates brake power output, sync setting and
error codes
· Thumb
control manual override
· Advanced
internal circuit protection prevents damage
· Operates
in any position, no levelling required
· No electrician, assembly
or installation required
· Simple to set up
· No levelling or
mounting required, can be placed in any position within
reach of the driver – be aware of other brake controllers mounting
requirements, check with manufacturer first
· Can be used for
permanent installation
· Powers up via 12v
accessory/cigarette socket (Do not run other accessories from the
same plug/circuit)
· 6 metre heavy
duty twin core main loom - split tubing not used, too large in
diameter and experience has been that it will damage door rubbers etc
· 4mm heavy duty 7
core from plug to plug
· Loom from
controller is bracketed to ensure absolute reliability, wiring will
not twist, separate or break away from controller circuit board
· All connections
soldered with heat shrink protection – no crimping or insulation tape
used – stronger and prevents corrosion
· All joins and 7
core tips inside plug and sockets are soldered for strong and
reliable connections
· Dual wall heat
shrink used to secure connections, plugs and sockets – no insulation
tape or cheap methods used – adds strength and prevents water intrusion
· 7 pin flat or
round, 12 pin plug/sockets in any combination (7 pin small available
for Western Australia etc)
· FREE express post
– pick up from our base also available
· All units safety
tested prior to dispatch
· Compliant with
all state and national regulations
· 36 months
warranty
·
Free check and
test service – you send it, we check it!
****Please check
my eBay reviews and comments if you require reassurance of quality
and service!****
Please message
Dave if you have any questions – response is typically within 1 hour
......or check us out......
at
www.portablebrakecontrollersaustralia.com
Q&A:
Q: Who are Portable Brake Controllers
Australia?
A: We are a bona fide business,
registered for GST and with ASIC. We are not 'back yarders' and we
are the longest standing portable brake supplier in Australia
Q: Can this unit be cabin mounted
A: Modern vehicles have knee airbags,
mounting may interfere with their function, check with vehicle
manufacturer before any cabin mounting process is undertaken
Q: What are the power specifications for
this assembly?
A: Depending on your accessory socket
output, the following specifications apply:
POWER SETTING SPECIFICATION
|
Accessory Socket
|
Single Axle
|
Dual Axle
|
15A
|
MAX
|
MAX
|
10A
|
MAX
|
80%
|
Q: Does this come with instructions?
A: Yes, instructions for the controller
unit, as well as operational instructions for portable use are
supplied
Q: Why should I choose the Hayman Reese
unit?
A: Ordered directly from the
manufacturer, this unit is deliberately simple in operation and use,
it takes only a few minutes to be up and running. There is no
complicated set up programming and the unit can be used in any
position as long as it is within reach of the driver. All other
portable kits on the market require directional mounting and/or
levelling.
Q: Other kits use split tubing around
main loom?
A: The split tubing is too thick to use
through boot lid, tailgate etc. It will cause the opposite effect to
what it trying to prevent (damage to the wiring) and will cause a
crush effect on main loom and may also damage door/boot lid rubbers
etc.
Q: Can I order any plug/socket type
configuration?
A: Yes, you can add a note/message along
with your order, write it there and we will make sure it's right
Q: Are your units tested?
A: We test every unit prior to despatch
Q: Where are you located and do you have
distributors?
A: Located in Geelong, we generally
supply direct although we do have distributors in most states
Q: How long do orders take?
A: Dispatched via Australia Post,
overnight to major centres, other locations can be a few days.
Contact Dave if you have questions
Q: Are Electric over hydraulic portable
kits available?
A: Yes, although this is depends upon
what type of electric over hydraulic system is fitted – please
contact Dave for more info
www.portablebrakecontrollersaustralia.com
|