eBay

RAM Dual Suction Cup Mount for the iPad 1st through 10th Generations, All iPad Air, Most Other 10" Tablets, With or Without Cases

Includes dual 3.25" twist lock suction cup base, double socket arm with extended retention shaft, round base adapter and universal X-Grip™ III clamping cradle for 10" tablets.
The dual suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip™ III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip™ III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without cases and sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III™.
These are very sturdy and have a wide range of adjustment; they should be able to accommodate a tablet with virtually any case. It seems to work well with most folding kneeboards as well.

Compatible with the following tablets:
Apple iPad 9.7

Apple iPad Pro 9.7(1st Generation)

Apple iPad Pro 10.5 (2nd Generation)

Apple iPad Pro 11

Apple iPad Air 3

Apple iPad Air 4

Apple iPad Air 5

Apple iPad 6th Generation

Apple iPad 7th Generation

Apple iPad 8th Generation

Apple iPad 9th Generation

Apple iPad 10th Generation

Apple iPad 5th Generation
Apple iPad Air, Air 2, With or Without Case or Sleeve

Apple iPad 4 (With Lightning Connector) WITH OR WITHOUT CASE
Apple iPad 3 WITH OR WITHOUT CASE
Apple iPad 2 WITH OR WITHOUT CASE
Apple iPad 1 WITH OR WITHOUT CASE
HP TouchPad WITH OR WITHOUT CASE
Asus EEE Pad WITH OR WITHOUT CASE
Asus Eee Pad Transformer WITH OR WITHOUT CASE
Lenovo LePad Slate WITH OR WITHOUT CASE
LG G-Slate WITH OR WITHOUT CASE
LG Optimus Pad WITH OR WITHOUT CASE
Motorola XOOM WITH OR WITHOUT CASE
Motorola XYBOARD 10.1 WITH OR WITHOUT CASE
Pandigital R90A200 WITH OR WITHOUT CASE
Samsung Galaxy Tab 8.9 WITH OR WITHOUT CASE
Samsung Galaxy Tab 10.1 WITH OR WITHOUT CASE
Samsung Galaxy Tab 2 10.1 WITH OR WITHOUT CASE
Toshiba Thrive WITH OR WITHOUT CASE

Please check the measurements of your tablet with any case or sleeve in use against the dimensions shown below!

Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"

Maximum Length (With End Supports) 10.25"

Maximum Length (Without End Supports) Unlimited
Depth = 0.875"

Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

RAM mounts are made here in the US. They are the best mounts available and carry a lifetime factory warranty.

We also have other c-clamp, suction cup, glareshield, vehicle & leg mounts for most iPad, Galaxy, Lenovo, HP Touchpad, and other tablet products with or without cases in place.

*************************************

INTERNATIONAL CUSTOMERS PLEASE NOTE:

DELIVERY TIMES are estimates - if not outright wild guesses - from Ebay and the carriers only and are NOT guaranteed. Our experience is that standard Priority Mail shipments to Canada, Australia and most of Europe generally arrive in a week or two but there are exceptions. First Class Package service, where available, will take longer. Some regions can take three weeks to a couple of months; see below for specific trouble spots. PLEASE ALLOW ADEQUATE TIME FOR YOUR SHIPMENT TO ARRIVE.
CUSTOMS PROCESSING may cause additional delays; we have no control over this and are not responsible for the consequences.
CUSTOMS, DUTY, BROKERAGE, VAT & OTHER charges may be imposed by the destination country; these costs are typically collected by the carrier at the time of delivery and are the responsibility of the purchaser. We have no control over this either; please check with your local authorities FIRST if you have questions.
WE CANNOT mark shipments as gifts or reduce stated values for customs purposes.
CUSTOMERS IN SOUTH AND CENTRAL AMERICA & SOME PARTS OF ASIA: On occasion, USPS Priority Mail to these regions can take as long as two to three months due to customs processing and the mail systems in these areas, and tracking data can be spotty once the shipment leaves the US. We have no control over this. We HIGHLY recommend USPS Express Mail in these cases as it gets better tracking and generally takes no longer than a week or two even under the worst of circumstances.
SELECTING ANYTHING OTHER THAN USPS EXPRESS MAIL OR EBAY GLOBAL SHIPPING TELLS US AND EBAY THAT YOU UNDERSTAND THE ABOVE INCLUDING THE POTENTIAL FOR DELAYS AND AGREE TO WAIT.