BREWZILLA (65L Robo Brew) All-In-One Single vessel Brewery

Product Information

• BrewZilla is bigger size of Robobrew with new name.
• The BrewZilla is designed to be a compact single vessel all grain home brewing system that can be run off a single AU 240v socket. Complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 60L, it is the ideal solution for those who want to brew doulbe size brew in all grain brewing – Fast to setup, brew and clean up EASY – Very simple design and easy intuitive design VALUE.
• This Brewzila designed for high powerful electrical system which capable 15amp brewery has over 3kw of power so you can get up to boil in no time.
• This brewery has been made with ultra low watt density elements. This means less caramelisation and also makes this brewery capable of producing very light beers with very little maillard effect. This is also particularly good with high gravity beers or barley lines that can sometimes get some degree of scortching in other breweries with higher watt density. The lower watt density also means the elements are much easier to clean.

Features

• Made of 304 grade stainless steel
• Build-in Pump with pre-installed sparging arm which can be installed/dismantled easily
• Additional stainless steel sieve cover on top of grain with support pole in middle
• Combination of 3 rate power heating : 500w + 1000w + 2000W for maximum 3500w Heating capacity
• With an inner bucket for mashing the grain, also make it easily run either batch sparging or circulation sparging by a pump
• More compact and affordable

Specification

• Full stainless steel for both boiler and grain tube/sieve and tap
• Build-In pump which controlled seperately by a button with stand sparge arm
• 220-240V/500W+1000W+2000W heating Power(optional running one of them or both), with AU/NZ/Euro plug
• +/- 1C prevision for temperature display/control
• 65L volume
• 15.5kg weight in total

Packaging

• Immersion Chiller
• Digital Backlit Temperature Control/Display.
• Delay Start Timer
• Step Mash Functionality
• Malt Pipe & Malt Pipe attachments
• 3 Element Control (500W+1000w+2000w )
• Stainless ½” BSP Ball Valve with 13mm barb fitting.
• Magnetic drive pump mounted in the base of the unit

Notes

• There will be some diviation for temperature between display and actual measurement of the grain when mashing, you'd better control the mashing temperature manually to adjust the diviation. Running the pump will shorten the diviation.
• Also be awared that there's lock for ball valve tap, you need release the lock before you want to open the tap
• The Power supply will suit for Australian/New Zealand/Europe, for other country you need check with seller to confirm you can use.
• Also,. Out of the box this unit needs to be manufactured with a 15amp power socket. With that said you can conver this to a 10amp compatible device with something like this:
• Ampfibian Mini 15amp to 10amp adaptor. If you do this you will be able to run the Digiboil however if you turn on all three elements you will trip the circuit breaker. For this reason you will only be able to use a maximum of 2 of the elements. (not all three).
• So yes you can run this device on a 10amp power socket however only if you are happy to have less power as a result.

Gallery

Terms & Conditions