G3 Fermenter King - Pressure Fermenting Kit - 35L

Product Information

• The Fermentasaurus is the world’s first conical PET fermenter that is pressurisable up to 2.4 Bar working pressure. This new model of fermenter has only been possible to manufacture using a highly specialized PET grade and a new type of PET injection/blow moulding machine that has been commissioned in Springvale, Victoria, Australia. This Australian made product will change the way home brew is made and greatly simplify the home brewing process
• The Fermenter King Gen 3 is a considerable upgrade from the original Fermentasaurus, featuring an innovative dump valve along with lots of useful add-ons to the Unitank loved by thousands of homebrewers worldwide.The new dump valve is called the Plunger Valve. Compared to the previous Butterfly Dump Valve, it is a simpler, sleeker design that is much easier to dissemble and clean. It is an overall more sanitary dump valve and we believe that it will help brewers brew even better beer than before since sanitation is key to brewing great beer in the first place. Much like a bung or a sink plug, the Plunger Valve closes off the bottom of the fermenter by being pushed in from the top. The seal is airtight, ensuring nothing enters or leaves the bottom hole of the tank. Pulling the Plunger Valve up opens the bottom of the tank, allowing yeast slurry and vegetal matter to fall through. It’s so easy!
• Other new features with Fermenter King Gen 3 include cooling coil ports, CIP sprayball insertion, in-built thermowells and Tri-Clover fitting compatibility.

Features

• New Plunger Valve - More sanitary and easy to use!
• New Thermowell - Get true liquid temperature readings
• New Floating Dip Tube - Fixed central tank position
• New dry Hop Port - Wider access lid port for easy dryhopping
• New Tri-Clover Compatibility - Attach any number of 2 inch Tri-Clover accessories
• Optonal Temp Control - Attach our Temp Control Kit to heat or cool your tank internally
• CIP Capable - Attach our Cleaning Kit for easy cleaning without scrubbing
• Compatible with Gen 1 collection bottles
• Brewers can pressurize the vessel up to 35psi to carbonate and dispense directly from Fermenter King like a keg! Alternatively brewers can transfer under pressure to stainless kegs without oxygen exposure.

Specification

• Fermenter Body: High Molecular Length PET
• Fermenter Volume: 35L
• Plunge Valve 304 Stainless
• Frame: 304 Stainless Frame
• Pressure Rated Lid: 304 Stainless Steel Ball Lock Posts, Glass Reinforced Nylon, 2.4 bar (35psi) pressure relief valve
• Non-Pressure Rated Lid: Glass Reinforced Nylon
• Lid Seal: Nitrile Butadiene Rubber (NBR)
• Working Pressure: 2.4Bar (35psi)
• Burst Pressure: above 8Bar
• Test Pressure: 5Bar

Packaging

• 1 x 35L G3 Fermentasaurus PET fermenter with screw lid and airlock kit as well as the plunger valve
• 1 x 500ml Yeast harvest container which can srew on bottom valve and take off after receival of yeast
• 1 x Meauring tape which can stick on the fermenter
• 1 x Stainless steel frame can hold the fermentasaurus

Notes

• We highly advises using homebrew-grade cleaning chemicals like phosphoric acid-based sanitisers and non-caustic cleaners. Follow the recommended dilution rates on the product labels or from reputable homebrew books such as How To Brew by John Palmer.
• Phosphoric acid sanitisers should have the pH range between 2.2 - 2.8. This is about a 1.5 - 2ml of sanitiser in 1L of water. Above the pH of 2.8, the sanitiser fails the 30-second test to prevent microbial growth. Below 2.2ph range, the sanitiser will affect the flavour of beer.
• Heat does more damage to PET fermenters than chemicals. At 55 degrees Celsius, the PET will soften and deform permanently. It is best to allow hot cleaning solutions to cool down to at least 30 degrees C before use.
• Adhering to these recommendations will ensure the integrity of your fermenter tank for its useable life.

Gallery

Terms & Conditions