- Condition: 100% new
- Color: Black & Red/Black/White
- Material: Vinyl
- Size: approx. 167.5x12.5 cm(65.94x4.92 inch) (LxW)
- Item included: 1 x pair car stickers
- Compatible With: fit for universal
-
This Is Aftermarket Replacement Item But Not Genuine
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) In the decision to dress up a week before the car do not wax, wax stickers sticky sticky
- car stickers paste after three days do not wash, do not stick in the rainy days, so the effect will be bad!
Product Dimension:
Attribute:
Feature:
1) Follow the original factory specifications.
2) Easy installation.
3) Durable and reliable.
4) Provide eye-catching show off and personlise your car.
5) In order to reduce the difficulty of customer installation, we provide the car stickers have been covered in advance transfer film. (Except for block continuous graphics).
Dry Paste Method:
1) Clean the body, keep dry.
2) To determine the need to paste the location. Under normal circumstances, slowly side of the paste, while scraping with a tool, while the end of paper.
3) If the graphics are not large, but also transparent transfer film and stickers all tear off and then paste. But be careful not to accidentally stick.
4) Paste the good, and then repeated scratch several times. Remove the transparent transfer film.
5) In the door and sewing with a knife to draw a knife, inward package Fu paste.
6) Do not let the car stickers and body any separation or protrusion.
Wet Paste Method:
1) Clean the body, will be posted on the body parts of the water evenly - to reduce the sticker viscosity, easy to adjust the location.
2) To determine the need to paste the location. Slowly side of the paste, while gently scraping with a tool, while the end of paper.
3) Encountered the door handle or anti-rubbing according to the situation to cut the material and included.
4) The appropriate adjustment, the graphic position to determine the correct, forced repeatedly scraping water and bubbles. Remove the transparent transfer film.
5) In the door and sewing with a knife to draw a knife, inward package service stickers.
6) Do not let the car stickers and body any separation or protrusion.
7) As far as possible in the car stickers in the water dry, the conditions can be moderate heating drying. According to the weather, after a day or two after the car wash.
How to clear:
With the nail gently pull the edge of the stickers, and then tear the whole, will not leave marks will not hurt the paint. Winter if the cold can not be scraped corners, hair dryer can be used to properly heat the glue, soft melt can be easily removed after the soft.
