Metal detector Fortuna M3 (PL2943) up to 2 meters.

Fortune M3 with a PL2943 case with a large display 7 × 4 Winstar is a selective IB metal detector with metal recognition operating on the principle of induction balance.

Discrimination of metals - numerical and barreled VDI display, as with more expensive devices, such as MINELAB, FISHER, XP Metal Detectors, GARRETT (its digital value corresponds to different objects and metal alloys).

Specifications:
  • Discrimination: VDI number (VDI), synograph.
  • Target voice: 90-tone, 4-tone, dual-tone.
  • Soil balance: manual, automatic.
  • Ferrite setting: automatic.
  • Sensor Balance Care Compensation: Automatic.
  • Backlight display.
  • Winstar 7 × 4 display.
  • The latest firmware available.
  • Masks. The ability to disguise unwanted metal.
  • Several search algorithms.
  • Pinpointer.
  • Setting the device to the frequency of the existing sensor.
  • Search Sensor Frequency: 5-20 kHz
  • DD sensor 30x32 cm.
  • Housing PL2943WH (dimensions): 140 × 100 × 30 mm.
PL2943WH is a thin instrument waterproof case made of impact-resistant heat-resistant ABS plastic UL-94V0. Provides protection against dust and moisture in accordance with IP65.

Deep test Fortuna M3 / Fortune M3 by air:
DD 320x300 mm 7 kHz / current 86 mA / separation in frequency 1.8 kHz / sens 6.
  • 5 cop USSR 1981: 41 cm;
  • Cop 3 1910: 37 cm;
  • On average, the detection range by air = 32-57 cm per coin;
  • Large metal objects up to 150-200 cm.
The main parameters of this assembly:
lithium-ion battery 2200 (real capacity) mAh 3.7V;
collapsible, adjustable rod, the lower part - impact-resistant plastic, the upper part - high-strength aluminum, covered with factory powder paint;
quality board, factory-made, double-sided, with a protective mask and plating holes.

By nutrition:
1 In the complete set, the unit is powered by 3.7 V (18650 lithium battery at 2200 mAh).
2. If the power will be made your own, then it is possible from 2 to 12 V.
3. Power connector for plug 5,5x2,1 mm.
4. The pinout of the sensor connector is as follows:

1 - RX +
2 - RX -
3 - screen
4 - TX +
5 - TX -
5. Sensor frequency: 7.2 kHz (default).
6. Spacing between TX-RX: 1.7-1.8 kHz.

The device is multifrequency, with it you can use different coils with different frequencies.

Contents of delivery:
  • Folding strong bar;
  • The control unit in the PL2943 package with a large 7 × 4 Winstar display;
  • Coil 30x32 DD;
  • Battery;
  • Charger;
  • Instructions.
Manufacturer Fortune
Country of origin Ukraine
Type soil, underwater
Experienced Series
7.2 kHz operating frequency
Detection depth 200 cm/57inch


Made in Ukraine! Quality, reliability, good depth indicators, ease of use!

Free Shipping. Tracking number. Carefully package.
 
World Wide shipping 14-40 working days.