Why Foxwell NT650 Elite Diagnostic Scanner?
- Diagnostic Function: read/clear fault codes for Engine, ABS system, and Airbag system, turn off the MIL light after finishing clearing the trouble codes.
- 26+ maintenance services, such as ABS bleeding, Oil light reset, EPB reset, SAS reset and etc.
- All 10 modes of OBDII functions, read/clear codes, read live data stream, read freeze frame, I/M readiness, On-board monitor test, EVAP test, read vehicle information, and component test.
- Lifetime FREE Update: easy to get the latest diagnostic software version via each time free update, without an additional update fee. (Note: it needs to update on PC and download the new version to NT650 Elite.)
- Wide Coverage of 68+ Car Brands: covers 10,000+ vehicle models in the American, European, and Asian cars market, works on the latest 2021/2022/2023 models including cars, SUVs, minivans, and light-duty trucks sold worldwide. easy to get the newest diagnostic software version via each time free update, without an additional update fee. (*Note: it needs to update on PC, and download the latest software version to NT650 Elite.)
Support 3 Main System Diagnosis
Diagnosis for Engine system
Many car owners are always confused with the flashing check engine light, which will appear because of various problems, for example, the engine injector should be cleared or engine combustion is not good. If the problem is not solved in time, it will affect the quality of vehicle exhaust and pollute the environment. This check engine code reader will do you a favor to locate the cause and turn off the check engine light with the problem resolved.
Diagnosis for ABS System
Besides read/clear fault codes for ABS system, NT650 Elite also support the following diagnostic functions:
- ABS Test – tests ABS motors, solenoids, solenoid enable relays, EMBs, and more.
- ABS Version Test – displays the name of the brake system and the ABS controller version number, software ID, and sequence value.
- Actuator Test – tests AYC valves, inlet valves, outlet valves, pump motors, and TRACS valves.
- Auto Bleed Test– removes air from the internal brake fluid chambers after servicing the brakes.
Diagnosis for Airbag System
Airbag/SRS system is located in the body control module, which plays an important role to ensure driving safety. There are many possibilities if the airbag warning light stays on, including the trouble of airbag, air spring, collision sensor, airbag plug loosening, line open circuit and etc. Therefore, NT650 Elite airbag scanner allows you to have a deep analysis and detection of your vehicle via reading the fault codes. But sometimes the permanent fault codes in this system will still appear and the warning light flashes after the airbag replacement. Then you will need this srs code reader again to turn the light off .
26+ maintenance functions
1. Full OBDII/EOBD Engine Check
18. Language Change
19. Windowsdoor
20. Turbo
21. Headlamp
22. Change Tire Size
23. Tcmoil
24. AT Adaption
25. Replace airbag ECU model
26. EVAP Test
and more……
Be Your Reliable Assist for Detect Vehicle's Situation
A Must Diagnostic Tool Before Annual Inspection —— Comprehensive OBD2 functions for your vehicle's health
Besides diagnosis for ABS/SRS/Engine systems, NT650 Elite car code reader also includes all that a popular OBDII scanner has. Get your own NT650 Elite diagnostic tool, to check your vehicle thoroughly before the annual inspection.
- Read Codes: Present some diagnostic trouble codes after scanning the vehicle.
- Clear Codes: Clear the fault codes after repairing according to the prompt of the scanner.
- Live Data Stream: Show the information of continuous data stream from a vehicle in a live graphic (waveform) display.
- I/M Readiness: Shows whether the various emis-sions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
- Freeze Frame: Reads and displays live ECU/PCM data stream, plotting functions graphically, and stores freeze frame data.
- On-Board Monitor Test: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emis-sion-related fault occurs.
- O-2 Sensor Test: Allows retrieval and viewing of O-2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer. (Note: If the vehicle uses a controller area network (CAN) protocol to communicate, this function is not supported by the vehicle)
- On-Board Monitor Test: Retrieves and displays test results for emis-sion-related powertrain components and systems.
- Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
- Component Test: NT650 Elite will control the operation of vehicle components, tests, or systems... (Note: This function will depend on vehicle compatibility. )
*Kindly send your VIN to check compatibility if it's not supported.
|
|
|
|---|---|---|
AutoVIN ScanWith the autovin function, this foxwell scanner will be able to identify your vin automatically and show ECU information. straightforwardly get detailed info of the car, ranging from engine type to where it was manufactured.Then it offers full system diagnosis and comprehensive codes after finishing scanning and detection. | Fault Codes DefinitionThere are thousands of code definitions in the built-in DTC library. You can check the code definition on the machine when the scanner shows you the fault code. Helps you decide whether you could fix it or have to get help from a mechanic. It will save your time and energy as you don't need to search the fault codes definition on the internet. | 2 in 1 Live Data DisplayFoxwell NT650 Elite will show you real-time data in text and graphs like engine speed, engine coolant temperature, fuel system status, short-term fuel trim, etc. You can customize the data graphs as you need, select different parameters (max 2) to create a 2-in-1 live data graph. Helps you more accurately analyze the vehicle health situation. |
|
|
|
|---|---|---|
Easy to Use1. Hand-held device: allows you to hold it with one-hand operation. 2. Clearly arranged keypad: the screen tips will show you which key to press for enter next step. 3. Plug and Play: it will auto charging after plugging into the vehicle, you can directly use it to start diagnosis without updating the software, it is already the latest version after being out of the factory. | Free Update on PC1. Download the updated app on FOXWELL website, and install it on your PC at first. 2. Connect NT650 Elite to your PC via USB cable, or remove the SD card to insert it into a card reader then connect to the PC. *USB cable and SD card reader are both in the product package. 3. Open the updated app on your PC, click "Download" and "Update". *If you update via SD card, please insert the SD card into NT650 Elite after finishing the update. | Support 16 LanguagesBuilt in multilingual menu for your needs, it support 16 languages: English, Italian, Germany, Spanish, French, Portuguese, Turkish, Polish, Dutch, Chinese, Japanese, Korean, etc. |
FOXWELL NT650 Elite Diagnostic Scanner —— Covers Worldwide Car Makes for American, European, and Asian Market
Note: The specific function compatibility is depends on the car models, kindly send your vehicle VIN to check it in advance.
| Specifications |
- Working Temp: 0 to 60°C (32 to 140°F)
- Storage Temp: -20 to 70°C (-4 to 158°F)
- External Power: 8-18 Volts powered by vehicle battery
- Dimensions: 200*130*40mm (L*W*H)
- Blow molding case: 330*220*80mm (LWH)
- Weight: 1.8kg
| -Package include |
- NT650 Elite Scan Tool
- User’s Guide
- USB Cable
- Diagnostic Cable
- Blow molding case
