ship from US warehouse ,delivery:3days ! 
ship by UPS or USPS OR UPS

This Item includes:


3PCS Nema 34 Stepper Motor with 1090oz-in (7.7N.m) holding torque,5.6A current,99mm motor body length,

3PCS Driver DQ860MA with 7.8A peak current ,24-80VDC ,256 Microstep
3pcs power supply:350W  60V

1 pc breakout board&cable is free offered

                

1, Stepper Motor

Technical Specifications

Part No.:                      85BYGH450D-008 single shaft 

Frame Size:                NEMA34

Step Angle:                 1.8 degree

Voltage:                       2.13V

Current:                       5.6A/phase

Resistance:                 0.38 Ohm/phase

Inductance:                 4.1 mH/phase

Holding torque:           7.7N.m            1090oz-in

Rotor inertia:               1700g-cm2

Number of wire leads: 4

Weight:                          3 kg

Length:                         99mm

RED           A+

GREEN      A-

YELLOW    B+

BLUE         B-

Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you need Double shaft, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks!

 


 If you need customer designed size, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks!

2, Stepper Motor Driver DQ860MA 

DQ860MA


   Introduction,Features and Applications

Introduction

  DQ860MA is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.

Features:

l         High performance, low price

l         Average current control, 2-phase sinusoidal output current drive

l         Supply voltage from 24VDC to 80VDC

l         Opto-isolated signal I/O

l         Overvoltage, under voltage, overcorrect, phase short circuit protection

l         14 channels subdivision and automatic idle-current reduction

l         8 channels output phase current setting

l         Offline command input terminal

l         Motor torque is related with speed, but not related with step/revolution

l         High start speed

l         High hording torque under high speed

Electrical specification:

Input voltage

24-80VDC

Input current

＜ 6A

Output current

2.8A～7.8A

Consumption

Consumption：80W；  Internal Insurance：10A

Temperature

Working Temperature -10～45℃；

Stocking temperature -40℃～70℃

Humidity

Not condensation, no water droplets

gas

Prohibition of combustible gases and conductive dust

weight

500G



3, Power Supply 350W,60VDC

 

4, Breakout Board DB25

 

Description:

  • Built in DB25 male connector.
  • DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
  • DB25 Input Pin: P10,P11,P12,P13,P15.
  • DB25 GND Pin: P18-P25.
  • Power supply: +5V DC.
  • Built in C-class Optical-coupler.
  • High quality with Surface-mount Tech.

We ship worldwide!