Notice : This item's voltage is only 110V,if you need 220V ,
please contact us before you buy it .
Industry Water Chiller CW-3000 for CNC/laser engraving
NOTE： we don't ship the item to PO BOX address， and we only ship the item to English address, so please leave us your physical English address when you pay
If your country is not listed in our shipping policy, pls tell us your city and zip code, we will check whether your city belong to remote area or not, then tell you the accurate freight. Tks for your understanding and cooperation.
Specifications
1.Economy cooling equipment
2.CE approval
3.Easy installation and operation
4.Easily movable
5.high quality CW3000 chiller
High quality CW 3000 industrial chiller
1.CW3000/CW5000/CW5200 this model is widely used in laser printing, laser cutting , laser engraving , larser marking, CNC Router ,
2. Model CW3000 and CW5000 is suitable for single head laser engraver, and CW5200 for double head laser machine. Other supplier will use water pump to instead to save cost. The water cooling system is water circle cooling with integrated automatic water-alarm protection system, different from other company's pump cooling.
INTRODUCTION:
cw 3000 Series is professional cooling machine referring to international advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery.
1 Specific disconnection alarm security protection.
2 Hermetic type water tank,water is available for a long time used.
3 Real-time temperature monitoring, accurate knowledge of heating devices working condition.
4 Professional air-cooled forced radiator with strong heat dissipating capacity and difficult to be blocked up.
5 Equipped with alarm output port to protect sensitive components quickly.
6 High cost performance .low failure rate.
7 There are several options of power supply, complete in specifications.
CAUTION:
It is strictly forbidden to plug and run the cooler without feeding water.
1.Cooler should be placed in a well-ventilated, dry environment place and away from heat sources.
2.Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler,and should leave at least 10cm between obsturctions and air inlets of two sides.
3.The cooling water must be drained if the cooler is out of use for long time or before being transported.To protect laser heating devices, the radiator fan of cooler will suspend to work when water temperature is lower(about 10°C),and it will restart to run when water temperature rises to higher(about 20°C).
THE FIRST INSTALLATION:
It is very simple to install this industrial cooling machine, The first time installation of the new machine can be carried out by following steps.
8 Open the package to check if the machine is intact and all the necessary accessories are completed .
9 Open the injection port, then add cooling water.
10 According to system conditions ,connect the water inlet and outlet pipe well.
11 Plug in power,turn on the power switch,(Do not allow the water overflow)
12 Check the water level of the water tank again.(It should be 80-150mm from the surface of water to the injection port).
Notice : This item's voltage is only 110V,if you need 220V ,
please contact us before you buy it .
Industry Water Chiller CW-3000 for CNC/laser engraving
NOTE： we don't ship the item to PO BOX address， and we only ship the item to English address, so please leave us your physical English address when you pay
If your country is not listed in our shipping policy, pls tell us your city and zip code, we will check whether your city belong to remote area or not, then tell you the accurate freight. Tks for your understanding and cooperation.
Specifications
1.Economy cooling equipment
2.CE approval
3.Easy installation and operation
4.Easily movable
5.high quality CW3000 chiller
High quality CW 3000 industrial chiller
1.CW3000/CW5000/CW5200 this model is widely used in laser printing, laser cutting , laser engraving , larser marking, CNC Router ,
2. Model CW3000 and CW5000 is suitable for single head laser engraver, and CW5200 for double head laser machine. Other supplier will use water pump to instead to save cost. The water cooling system is water circle cooling with integrated automatic water-alarm protection system, different from other company's pump cooling.
INTRODUCTION:
cw 3000 Series is professional cooling machine referring to international advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery.
1 Specific disconnection alarm security protection.
2 Hermetic type water tank,water is available for a long time used.
3 Real-time temperature monitoring, accurate knowledge of heating devices working condition.
4 Professional air-cooled forced radiator with strong heat dissipating capacity and difficult to be blocked up.
5 Equipped with alarm output port to protect sensitive components quickly.
6 High cost performance .low failure rate.
7 There are several options of power supply, complete in specifications.
CAUTION:
It is strictly forbidden to plug and run the cooler without feeding water.
1.Cooler should be placed in a well-ventilated, dry environment place and away from heat sources.
2.Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler,and should leave at least 10cm between obsturctions and air inlets of two sides.
3.The cooling water must be drained if the cooler is out of use for long time or before being transported.To protect laser heating devices, the radiator fan of cooler will suspend to work when water temperature is lower(about 10°C),and it will restart to run when water temperature rises to higher(about 20°C).
THE FIRST INSTALLATION:
It is very simple to install this industrial cooling machine, The first time installation of the new machine can be carried out by following steps.
8 Open the package to check if the machine is intact and all the necessary accessories are completed .
9 Open the injection port, then add cooling water.
10 According to system conditions ,connect the water inlet and outlet pipe well.
11 Plug in power,turn on the power switch,(Do not allow the water overflow)
12 Check the water level of the water tank again.(It should be 80-150mm from the surface of water to the injection port).
Shipping policy:
We will send out the item within 2-3 days through DHL/EMS/FEDEX to the below countries: Portugal , spain , Sweden , Please note: we ship the item to the aboving country and district:. other countries, pls contact me to confirm the shipping cost. Thank you very much!!! We will send tracking number to your eBay email within 1 day after sending out your item We will declare the item as gift or sample with low value. However, Import duties, taxes and Charges are not included in the item price. The buyer is responsible for all the duty and local tax. We accept Paypal only. Payments must be finished within 5 working days after bid, otherwise, Unpaid Item dispute will be reported to eBay. Refund &Return policy We take all the responsibility during delivery. If you do not receive your item, we will refund you the full money or send you a new item according to your request. We can accept the return item within 60 days after the buyer receives it. Once we receive the return item, then we will refund you full money. Feedback Policy We will very appreciate you give us positive feedback (5 star) ASAP. If the item you got in any problem, PLS don’t hesitates to contact us. We will do our best to help solve the problem |
The free listing tool. List your items fast and easy and manage your active items.