Designed and manufactured in the USA, this Universal JAMMA Adapter allows you to quickly and easily convert most arcade PCBs to a standard JAMMA harness.  Just cut, strip and place wires between the sets of terminal blocks then tighten the screw terminals.  This is by far the quickest and easiest way I've found to convert an arcade cabinet or just to test and troubleshoot a PCB.  With no soldering and easy re-work and re-configuration between PCBs you can quickly get your boards up and running.  

Improvement from version 1:

• Now with version 2 I have placed two slots in the middle of the PCB so that routing signals from one side of the PCB to the other can be done more easily.  

Version 1 Notice:

If all you need is a 56 pin connector and have no need for the holes in the PCB I now offer the version 1 PCBs for $19.95 in my other auction titled 56 Pin Universal JAMMA Adapter.

Product Description: 

The board makes contact to the JAMMA harness through the use of a keyed finger edge connector which terminates to two rows of sturdy terminal block connectors.  The PCB mating side consists of a 56 pin card edge connector which terminates to two additional rows of terminal blocks.  The user will only need to cut wires to length, strip the ends, make the desired connections, and tighten down the screws in the terminals.  Safety First: Always use wires capable of handling the current of your PCB, when in doubt look up the power requirements of the board prior to use. 

What's Included:

1 Universal JAMMA Adapter with 56 pin card edge connector

1 Universal JAMMA Adapter with 44 pin card edge connector

1 Universal JAMMA Adapter with 36 pin card edge connetor

Shipping:

The board will easily fit into a padded USPS Priority Mail envelope.  I can ship internationally if desired, just let me know your location and I will get back to you with a rate.

Thanks for looking and feel free to contact me with any questions.