Content:

2 x Complete Nacelles


IMPORANT NOTE:
- DO NOT try to fit a 55mm EDF it will not work.
- AT A MAXIMUM YOU CAN USE A 50mm EDFs whose housing diameter AT THE WIDEST AREA IS NO MORE THAN 55mm).

Overview:
- 2 x White Fan Cowls for EDF housing (IMPORTANT: Although the front Ø is 60mm, the Ø gets smaller towards the rear of the nacelle)
- 2 x Inlet Cowls.
- 2 x Pylons Struts.
- 2 x Reducer Rings (Optional - do not use if your EDF is large enough).
- Available only in White / Aluminum.
- Paint-ready, use any spray paint brand, preferably glossy (nicer result, see pictures for an example of a black painted Fan Cowl).
- Made of very strong yet very light engineered alloy, specifically treated for demanding Drones and RC applications.
- Outside shell diameter of EDF must not exceed 55mm.
- Assembly is best done by glue, a little bit of yellow wood glue a.k.a. yellow cement works very well and makes it possible to disassemble-reassemble when used sparsely, it is also possible to use tie-downs for the Strut to White Fan Cowl assembly as an alternative to glue.
- EDF and Motor Not Included