Digital Timer:
These specially selected timers have been tried and tested and we believe are the best on the market and are excellent value for money.
Using digital timers can help in numerous ways:
· Programme lighting to come on at dusk, thus making a household look occupied
· Providing a "lived in look" when away from the home for long periods of time
· Hydroponic installations
Technical Specification
· CE Certified
· 250V AV, 50Hz
· Max Load: 2500w/10(1)A Resistive load;
· Min Setting Time: 1 Minute
· 20 Programme settings Operating Temp: -10 to + 40 degree C
· Accuracy: +/- 1 Minute per month
· Battery back up: >1000 hours
Mechanical Timer:
1. Setting the On/Off periods
Daily Plug-in Timer:
This timer can set up to 24 On/Off commands a day.
Using your finger, a pen or screwdriver pull up all the segments that
correspond to the desired “Off” period. For the desired “On” period, make
sure the segments are pushed down.
Each segment represents 30 minutes
2. Setting the time:
Turn the dial clockwise until the triangular pointer is pointing at the actual
time. Ensure that the switch on the side of the unit is set to the position.
3. Connection
Once the desired On/Off periods and actual time are set, plug the Timer
into the wall socket, and then the appliance’s plug into the Timer. Ensure
the wall socket and the appliance are on.
The Timer will start to operate and switch on and off the appliance
according to the pre-set On/Off commands.
4. Manual On/Off
The pre-set On/Off commands can be interrupted by using the manual
override switch located on the side of the unit. When switched to the
position I, the connected appliance is switched on permanently.
5. Specifications
Power Supply: 240V~, 50Hz
Capacity: 13A resistive load
Type of disconnection: μ
Min. Temperature: 0℃
Max. Temperature: 55℃
6. Precautions
For indoor use only.
Do not use with any appliance, which exceeds the capacity of the Timer.
Always ensure that the plug of any appliance is fully inserted into the Timer.
If you need to clean the Timer, remove from the mains and wipe with a dry
cloth. Do not immerse in water or any liquid.
Fan heaters and heaters with exposed elements should not be left
unattended, and it is recommended that this type of appliances are not to
be connected to timers.
7. Accuracy
Daily plug-in Mechanical Timer: ±10 Min