Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets

monitor the real-time temps, check the history data and change the parameters, all work on the app


Main features

  • Plug and play design, easy to use
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Support reading with Centigrade or Fahrenheit unit
  • Maximum output load: 1100W(110V)/ 2300W(230V)
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Temperature calibration funcition
  • Compressor delay protection for refrigeration control
  • High and low temperature limit alarm can be set up
  • Probe abnormal alarm
  • WiFi Smart APP

  • WiFi App Control
  • Heating and Cooling Outlets
  • Alarms at High / Low Temps
  • Celsius (℃) or Fahrenheit (℉)
  • Power: Voltage: 100~240Vac,50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac).
  • Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
  • Temperature measurement range:-40℃~100℃/-40℉~212℉
  • Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)

 

 

If you want to maintain the humidity from 47% to 55%

Set "HS" (Target Humidity) as 50.

  1. Switch on the power
  2. Press the "SET" button for 3 seconds to "HS" humidity setting
  3. Press the up or down button to adjust the humidity to 50%

Set "HD" (Humidification Differential Value) as 3.

  1. Press the "SET" button to select "HD"
  2. Press the up and down button to adjust the humidity to 3%

Set "DD" (Dehumidification Differential Value) as 5.

  1. Press the "SET" button to select "DD"
  2. Press the up and down button to adjust the humidity to 5%

How to connect the IHC-200 WiFi with APP (INKBIRD)?

Specification:

  • Power Input: 100 ~240VAC, 50Hz/60Hz
  • Power Output: Max. 10A, 100V ~240V AC
  • Humidity Measuring Range : 5%-99.99%RH
  • Humidity Control Range : 5%-99%RH
  • Resolution: 1%RH
  • Accuracy: ±3%RH
  • Input Power Cable Length: 1.5m (5ft)
  • Output Power Cable Length: 30cm (1ft)
  • Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
  • Socket: 85x42x24mm(3.3x1.7x1inch)
  • Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
  • Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

Package content

  • 1 x WiFi Temperature Controller
  • 1 x WiFi Humidity Controller
  • 1 x User Manual

Inkbird Digital ITC-308 WIFI Temperature Controller Heating and Cooling Outlets

monitor the real-time temps, check the history data and change the parameters, all work on the app


Main features

  • Plug and play design, easy to use
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Support reading with Centigrade or Fahrenheit unit
  • Maximum output load: 1100W(110V)/ 2300W(230V)
  • Dual display window, be able to display measured temperature and set temperature at the same time
  • Temperature calibration funcition
  • Compressor delay protection for refrigeration control
  • High and low temperature limit alarm can be set up
  • Probe abnormal alarm
  • WiFi Smart APP

  • WiFi App Control
  • Heating and Cooling Outlets
  • Alarms at High / Low Temps
  • Celsius (℃) or Fahrenheit (℉)
  • Power: Voltage: 100~240Vac,50/60Hz, Current: 10A, Max Wattage: 1200W(110Vac).
  • Type of temperature probe: R25℃=100KΩ±1%, R0℃=26.74~27.83KΩ,B25/85℃=3435K±1%
  • Temperature measurement range:-40℃~100℃/-40℉~212℉
  • Temperature display accuracy: 0.1℃ /℉(<100℃/℉), 1℃/℉(>=100℃/℉)

 

 

If you want to maintain the humidity from 47% to 55%

Set "HS" (Target Humidity) as 50.

  1. Switch on the power
  2. Press the "SET" button for 3 seconds to "HS" humidity setting
  3. Press the up or down button to adjust the humidity to 50%

Set "HD" (Humidification Differential Value) as 3.

  1. Press the "SET" button to select "HD"
  2. Press the up and down button to adjust the humidity to 3%

Set "DD" (Dehumidification Differential Value) as 5.

  1. Press the "SET" button to select "DD"
  2. Press the up and down button to adjust the humidity to 5%

How to connect the IHC-200 WiFi with APP (INKBIRD)?

Specification:

  • Power Input: 100 ~240VAC, 50Hz/60Hz
  • Power Output: Max. 10A, 100V ~240V AC
  • Humidity Measuring Range : 5%-99.99%RH
  • Humidity Control Range : 5%-99%RH
  • Resolution: 1%RH
  • Accuracy: ±3%RH
  • Input Power Cable Length: 1.5m (5ft)
  • Output Power Cable Length: 30cm (1ft)
  • Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
  • Socket: 85x42x24mm(3.3x1.7x1inch)
  • Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
  • Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

Package content

  • 1 x WiFi Temperature Controller
  • 1 x WiFi Humidity Controller
  • 1 x User Manual


On Aug 2, 2023 at 20:23:26 PDT, seller added the following information:

DataCaciques