Car Dual Digital LED Display Intercooler Supercharger Temperature Gauge Sensor
    • Condition: 100% new
    • Shell Color: Black
    • Material: Metal&Plastic
    • Size: approx. 4.7x2.8x1.7 cm(1.85x1.10x0.67 inch) (LxWxH)
    • Cable Length: approx. 96 cm(37.80 inch)
    • Display Color: Red + Blue
    • Supply Voltage: DC 4-28V
    • Measuring Temperature: -50 ℃ ~ 125 ℃
    • Accuracy: 0.1 ℃
    • Item included: 1 x Dual Digital Temperature Gauge
    • Compatible With: fit for universal cars

    • This Is Aftermarket Replacement Item But Not Genuine

    • Note:

      1) All dimensions are measured by hand, there may be small deviations.

      2) Color may vary slightly due to the color setting of each individual monitor.

Product Dimension:

Feature:

1) 100% new with good quality.

2) Easy installation.

3) Stable characteristics, high reliability.

4) Measure car internal and external temperature.

5) Measure air conditioned room indoor and outdoor temperature.

6) Measure refrigerator internal and external temperature.

7) Measure fish pond water temperature.

8) Measure infant bath water temperature.

Parameter adjustment operation instructions:

Key function:

All key operations in the table are divided into long press and short press; long press button for about 3 seconds to release, short press button for 1 second to release.

Setting mode

In normal mode, press and hold the button for 3 seconds to enter the setting mode, display

C1, then release the button, then short button , cycle Display: C1 C2 CA.

C1: indicates temperature 1 fine adjustment correction setting

C2: indicates temperature 2 fine adjustment correction setting

CA: indicates bidirectional temperature reset factory setting

Temperature 1 trim correction

1) In the setting mode, press the button to switch to display C1, long press the button to enter the temperature 1 fine adjustment setting.

2) At this point, release the button and then "long press the button", the value will increase upwards. When the button is released, the value of "long press button" will be displayed again.Decrease downward and adjust to the corresponding temperature value repeatedly.

3) Wait for the screen to flash to save the settings and return to the previous menu.

Temperature 2 correction correction

1) In the setting mode, press the button to switch to display C2, long press the button to enter the temperature 2 fine adjustment setting.

2) At this point, release the button and then long press the button , the value will increase upwards. When the button is released, the value of "long press button" will be Reduce, repeatedly adjust to the corresponding temperature value.

3) The screen mark flashes to save the settings and return to the previous menu.

Two-way temperature recovery factory settings

In the setting mode, press the button to switch to display CA, long press the button to enter the two-way temperature to restore the factory settings.

At this point, release the button and then "short button", the loop displays: NO_YES

NO: indicates that there is no factory reset.

YES: means to restore factory settings.

Show NO by default.

When switching to the corresponding parameter number, release the button, wait for the screen to flash and return to the previous menu.

DataCaciques