NEW DC 3-5V High Voltage Generator Arc Igniter Lighter Boost Electronic Suite
Description:
Brand new
PCB size: approx. 54*18mm
Voltage and current power: DC 3-5V, current 5A, more than 15W. It is recommended to use a 3.7V 18650 lithium battery.
Output pulse voltage: 0.5kv-0.8kv
Working frequency: 20khz-25khz
Arc distance: 5-8mm
Feature:
Transformers have been encapsulated with resin, which has high safety and can work reliably and continuously for a long period of time.
The input of this product is connected to a DC 3-5V power supply.
When the secondary high-voltage output is not connected to a high-voltage rectifier diode and capacitor, the output two-stage line end can produce a purple high-temperature arc with a length of ≤0.8 centimeters, no hum, but the temperature is very high. You can easily light up the cigarette lighter momentarily. Even a very thin wire can be burnt (such as the scene of burning the fine wire in oxygen during the junior high school chemical test, but not as intense as in oxygen).
Fine workmanship and good performance.
Small in size.
Easy to use.
Used to DIY electronic lighter.
Note:
it is recommended that the power supply for each cigarette does not exceed 1 minute each time. Pay attention to heat dissipation.
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Package Included:
1PC*High Voltage Boost Module
Brand new
PCB size: approx. 54*18mm
Voltage and current power: DC 3-5V, current 5A, more than 15W. It is recommended to use a 3.7V 18650 lithium battery.
Output pulse voltage: 0.5kv-0.8kv
Working frequency: 20khz-25khz
Arc distance: 5-8mm
Feature:
Transformers have been encapsulated with resin, which has high safety and can work reliably and continuously for a long period of time.
The input of this product is connected to a DC 3-5V power supply.
When the secondary high-voltage output is not connected to a high-voltage rectifier diode and capacitor, the output two-stage line end can produce a purple high-temperature arc with a length of ≤0.8 centimeters, no hum, but the temperature is very high. You can easily light up the cigarette lighter momentarily. Even a very thin wire can be burnt (such as the scene of burning the fine wire in oxygen during the junior high school chemical test, but not as intense as in oxygen).
Fine workmanship and good performance.
Small in size.
Easy to use.
Used to DIY electronic lighter.
Note:
it is recommended that the power supply for each cigarette does not exceed 1 minute each time. Pay attention to heat dissipation.
Please allow 1-5mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Package Included:
1PC*High Voltage Boost Module
- We accept Paypal as the payment method.
- We accept eBay address for shippment.
- The default shipping is by China Post air mail/Hongkong air mail.
- Item will be shipped within 2-3 working days after full payment is received.
- The delivery to most of the countries will take 2-4 weeks, if there's no problem when pass through the customs.
- It will take about 30 days or more to some places.
- We accept paypal for payment
- We accept eBay address for shipping
- If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
- We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
- We are a company based in China developing and manufacturing electronic development device , including electronic components ,camera module, camera lens , LCD modules and other development board for Raspberry pi,Arduino and other opensource hardware Platform
- We can also provide customized design and manufacture services according to your requirements.