14010 Deep Transmission Pan Filter Extender Fits A518, A618 and A727 Transmissions for1997 Dodge Ram 1500,2006 Dodge Ram 3500
Product description
Material: Heavy gauge stamped steel construction and two stage heat dissipating finish, to ensure longer service life and stronger performance.
Applications: Fit most 1982-2007 Dodge A518 (46RH, 46RE), A618 (47RH, 47RE, 48RE) and A727 (36RH, 37RH) transmissions.
Function: This Filter Extender 14010 is available for transmission pan that will lower the filter 1 inch deeper into the pan, and allow proper oil pickup from pan.
Reduces fluid temperatures 20-50°F and increases fluid capacity.
Package includes: 1x5/32” Allen Wrench, 1xO-ring, 1x Transmission Filter Extender(Spacer Block), 5xFlat Washer, and 2 sets of bolts(6xbolts).
Package includes:
1x5/32” Allen Wrench
1xO-ring
1x Transmission Filter Extender(Spacer Block)
5xFlat Washer, and 2 sets of bolts(6xbolts)
Installation
1. Using a lint free rag, wipe the oil off the valve body mounting surface.
2. Install the O-ring provided in the groove of the transmission filter extender.
3. After determining which length bolts are necessary for your transmission, install the bolts through the provided washers.
4. Using a 5 32” Allen Wrench, tighten the bolts.
5. Torque the bolts to a maximum of 14 inch pounds.
6. Install transmission pan and fluid.
Note: Be careful when removing because the filter will still have fluid inside.
Description:
Applications:
Fit most 1982-2007 Dodge A518 (46RH, 46RE), A618 (47RH, 47RE, 48RE) and A727 (36RH, 37RH) transmissions.
Material:
Heavy gauge stamped steel construction and two stage heat dissipating finish, to ensure longer service life and stronger performance.
Function:
This Filter Extender 14010 is available for transmission pan that will lower the filter 1 inch deeper into the pan, and allow proper oil pickup from pan. Reduces fluid temperatures 20-50°F and increases fluid capacity.
Installation:
Be careful when removing because the filter will still have fluid inside.
1. Using a lint free rag, wipe the oil off the valve body mounting surface. 2. Install the O-ring provided in the groove of the transmission filter extender. 3. After determining which length bolts are necessary for your transmission, install the bolts through the provided washers. 4. Using a 5 32” Allen Wrench, tighten the bolts. 5. Torque the bolts to a maximum of 14 inch pounds. 6. Install transmission pan and fluid.