The following instructions are from the manufacturer FB page. These are the same as pictured in the second picture of the listing.

USE IN COLD PORCELAIN, WOOD, FABRIC, FOAM (FOFUCHAS),PLASTIC, METAL,BALLOONS.

Easy to use; remove from blister with tweezers, craft tools or fingers and attach to project.

When use with cold porcelain, attach in place with a little pressure before project dries completely.

The lashes can be paint with fine water based markers or liners. If mistake happens ,lashes can be erase with a cotton swab with water or alcohol. To pain them again, allow piece to dry completely.

To give volume to the look, use any 3D medium (liquid glass- clear media). Add a couple of drops to cover only the eye sticker. Dry the piece flat until the liquid glass turns clear, meaning is dry and ready!!

 

     EYE SIZE ?        STYROFOAM BALL EQUIVALENT ( 2.54 centimeters (cms.)  = 1 inch

Extra Mini: 3MM              Ball/Head 2 and 3 cms.

         Mini:   5 MM             Ball/Head 3 and 4 cms

Chico/Small: 7 MM          Ball/Head 4 and 5 cms.

     Medium:  9 MM           Ball/Head 5 and 6 cms.

Grande/Large: 11 MM      Ball/Head 6 and 7 cms.

Super: 13- 15 MM             Ball/ Head 8,9 and 10 cms.

Eye stickers 37 and 37-2 have their own measures, use:

            Mini:        Ball/Head 2 cms

Small/Chico:       Ball/Head  3cms

Medum :             Ball/Head 4 cms

Grande/Large:    Ball/Head  5 cms.

           Super:      Ball/Head  6 cms.

          Special:      Ball/Head 7 cms.